Energy Products

One of the best selling portable plasma cutters. BRAND NEW IN BOX. 4TH Generation Ramsond CUT 50DY, a 50 Amp, Dual Voltage (110V and 220V), Dual Frequency (50 and 60 Hz), Inverter Technology, High Frequency, Plasma Cutter. The CUT 50DY is the 4th generation of Ramsond line of plasma cutters; having evolved from the previous CUT50, CUT50D AND CUT50DX models. It is now equipped with DIGITAL AMP DISPLAY and INTEGRATED PRESSURE GAUGE located in the front panel. It is further upgraded witha fully insulated FOLDABLE HANDLE. It continues to utilize an UPGRADED GERMAN MADE COOLING SYSTEM. It has been internally redesigned to incorporate the latest high frequency inverter technology using V-MOSFETs made by TOSHIBA, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. This leads to a cleaner and more uniform cut. Furthermore, as a result of these improvements, CUT 50DY has been substantially reduced in size and weight. With the Ramsond CUT 50DY, regardless of your training, you can achieve smooth, clean and uniform cuts on a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass, aluminum plate and other conductive material) with minimal heat input and without distortion of metal. This model has been designed so it is easy to use by the do-it-yourself user, while fully accommodating the demands of professional operators.

This auction is for a brand new Air Plasma Cutter. This welder is made with most advanced inverter technology. The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOSFET, and then step down the voltage and rectification current, inverter power supply generateds powerful DC welding current through PWM technology. Because inverter technology of switch power is used, dimensions and weigh of main transformer has reduced substantially and efficiency by 30%. Piloting arc system can strike arc easily with principle of high frequency oscillating. It has functions that it can supply gas ahead and turn off gas delayed. This Air plasma cutter has the feature as below: ?Stabilizing ?Reliability ?Lightness ?Save-energy and no noise ?High cutting speed ?Cutting smoothly and no polish demands Cutting Machine can be used widely. It is suitable for cutting stainless steel, alloy steel, mild steel, copper and other color metal materials.

As one of the largest manufacturers of plasma cutting, tig/stick, arc (MMA) welding equipment in the world, Lotos Technology is proud to offer an extensive selection of industrial plasma cutting LTP6000 . Using IGBT technology, Lotos LTP6000 is designed and constructed to withstand extensive use in rugged industrial and construction environments to cut ANY kind of metal. It is perfect for any fabrication/truck builder/auto repair/body shop/home garage.

The Power Technologies Division of Ramsond Group has introduced its new 4th Generation Ramsond CUT 70DY, a 70 Amp, Dual Voltage (110V and 220V), Dual Frequency (50 and 60 Hz), Inverter Technology, High Frequency, Plasma Cutter. The CUT 70DY is one of the most powerful mini inverter plasma cutters in the market. Although compact, it packs a strong punch, cutting through steel and other metals as thick as 1.5 inches. This new Plasma Cutter is uniquely equipped with DIGITAL AMP DISPLAY and INTEGRATED PRESSURE GUAGE located in the front panel. It is further upgraded with a fully insulated FOLDABLE HANDLE. It utilizes an oversized GERMAN MADE COOLING SYSTEM. It has been internally redesigned to incorporate the latest high frequency inverter technology using V-MOSFETs made by TOSHIBA, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. This leads to a cleaner and more uniform cut. Furthermore, as a result of these improvements, CUT 70DY has been substantially reduced in size and weight. With the Ramsond CUT 70DY Plasma Cutter, regardless of your training, you can achieve smooth, clean and uniform cuts on a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass, aluminum plate and other conductive material) with minimal heat input and without distortion of metal. This model has been designed so it is easy to use by the do-it-yourself user, while fully accommodating the demands of professional operators.

*** SIMADRE 50DX 50 Amp Dual Voltage Plasma Cutter *** BRAND NEW 2012 MODEL with BETTER CONTROL PANEL and High-Performance Torch and Free Consumables *** DIGITAL DISPLAY V-MOSFET TECHNOLOGY AND CSA /CE APPROVED, It is Brand New DUAL VOLTAGE 50Amp Plasma Cutter Welder with High Performance Cutting Torch *** The newer semiconductor circuits with genuine Toshiba MOSFET component in this machine is designed quite well *** Cooling system is using advanced Germany equipment. With reasonable care it should provide many years of trouble-free service *** SIMADRE 50 Amp Dual Voltage Cutters are very stable machines, please look up all the excellent feedbacks we receive from our customers on our 50 Amps cutters *** This Unit is portable and operational on dual voltages. *** This machine is brand new and fully tested before shipping which assures that you do not receive a DOA unit, so you will find that the package has been opened for machine testing purposes *** Affordable: In terms of the quality and performance, it is similar as other well-known cutters. But the price is much lower than those machines *** Portable: This machine weights only 20 lbs and the box size is approximately 17 inches Length x 8 inches width x 16 inches height. *** This machine comes with torch and ground clamp and cable, air filter, regulator and initial consumables *** After all, this machine is powerful and well-equipped with same functions as other brands in the market!!!

Features & Benefits - High Frequency arc starting. - Cuts virtually any type of metal with ease. - Simple to use torches with inexpensive service parts and consumables. - High duty cycle @ 60 % of rated amperage capacity. - Exceptionally clean, smooth cuts. - Adjustable Post Flow (power plasma only) control up to 60 seconds to improve consumable and torch life. - Front air pressure adjustment makes adjusting pressure easy and painless. ( PowerPlasma only) - Front air pressure gauge allows quick verification of air pressure. - Over Current and Air Pressure light indicators keep you updated on your units operating condition.

Ramsond introduces the 4th generation of its CT520DY. CT520DY is a 3-in-1 multifunction cutting and welding machine. It is a 50 Amp plasma cutter, a 200 Amp DC (Direct Current) TIG welder and a 200 Amp ARC/MMA stick welder. It is dual voltage 110V/220V and dual frequency 50/60 Hz. It is equipped with DIGITAL AMP DISPLAY, INTEGRATED PRESSURE GAUGE, FOOT PEDAL FUNCTION and FOLDABLE INSULATED HANDLE. It uses the most reliable high frequency V-MOSFETs by TOSHIBA along with PWM (Pulse Width Modulation Processor) which help deliver a constant, concentrated and precise current to the cutting/welding surface. Regardless of your training, you can achieve smooth, clean and uniform cuts (1 inch) and weld a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass and other conductive material) with minimal heat input and without distortion of metal. CT520DY is easy to use by the do-it-yourself user, while fully accommodating of the demands of professional operators. It has five controls; the ON/OFF switch, Amperage Control Knob, the Post Flow Knob, Function Selector and the foot pedal ON/OFF switch. It has an integrated air pressure gauge in the front panel of the unit, as well as a large digital display that conveniently displays the current (Amps) setting of the unit. Note: This is a DC (Direct Current) TIG Machine. For aluminum welding AC (Alternating Current) is recommended. Each Ramsond CT520DY comes fully equipped with all accessories: TIG Torch, Plasma Torch, ARC/MMA Electrode Clamp, Air Regulator/Filter, Argon Flow Meter, Set of Consumables for the plasma and TIG torches, and Ground Clamp. Plug is not included. It comes with a 1 year Limited Warranty (Parts and Labor). The consumables are readily available both through Ramsond and third party sellers and are reasonably priced.

LONGEVITY ForceCut 40D Constant ARC Plasma Cutter! Series 40AMP Dual Voltage Plasma Cutter capable of cutting up to 1/2" thick steel! Compares to and outperforms the leading brands! Comes with a 60amp TORCH UPGRADE! This Plasma Cutter weighs in at only 25lbs and can run off 110 or 220 volt making it the ultimate in portability! This plasma cutter can cut any kind of metal including aluminum, stainless steel or even copper! This is the most portable and capable plasma cutter out of any other plasma cutter on the market for its retail price! This plasma cutter runs off Inverter technology which has completely taken over the market for portability and power! This plasma cutter will cut through a 1/2 inch thick piece of steel! This plasma cutter comes with most of the components needed for a complete set up! Your plasma cutter will be backed by an extensive top rated warranty for 5 years that covers parts and labor for this plasma cutter. This plasma cutter also comes with a 30 day satisfaction guarantee! please check out some of our multi-purpose machines if you are interested in a TIG welder as well with your plasma cutter for a very affordable price! Check out our video for the Longevity ForceCut 40D: http://youtu.be/A58uuKmhLr4