Energy Products

When you require exact measuring, you reach for a caliper. But an accurate measurement is meaningless if you can't read it accurately. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001". Instantly converts from SAE or Metric, the display can be zeroed at any point on the slide. Machine-grooved thumb-roll mechanism and position lock for sure adjustment. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. On-off switch with auto-off, two long-life batteries included (one spare).

The Corning hotplate 6795-PC series has LED digital display of speed (rpm), or temperature, and a glass-ceramic plate surface, a microprocessor-based temperature control, a three-prong plug, and works with a 120V/60Hz power source. This hotplate is used by researchers, professionals, and hobbyists to heat a variety of liquids and solutions in chemistry, food and beverage, biology, lab, and home applications. This Corning hotplate has LED, digital display of stirring speed in revolutions per minute (rpm) or temperature (degrees C), and an illuminated power indicator. Temperature display blinks until set temperature is reached. A glass-ceramic plate surface is scratch, corrosion, and chemical resistant, and has good cleaning ability. Its two-piece casting design deflects spills away from the electrical area, and includes a built-in rod mount support. The 6795-PD series comes in a variety of stirring speeds (+ or - 5% of set speed), and sizes, and can come with a in a stirrer apparatus. A microprocessor maintains consistent and repeatable temperature settings of 5 to 550 degrees C (+ or - 2 degrees C), adjustable in 5-degree C increments, with a flashing indicator that blinks until a set temperature is reached. The device can work with a temperature controller and support rod (sold separately). The PC-600 series meets European Standards (EN), and has a two-year warranty. Researchers, professionals and hobbyists use hot plates to heat a variety of liquids and solutions in chemistry, food and beverage, biology, lab, and home applications. Hotplates can have either a digital or an analog display, and can show temperature range, or stirring speed. Hot plate surfaces are commonly made of ceramic-glass, or stainless steel and have coatings such as porcelain. They come in a variety of dimensions. Some units can work with stirrers that can be supported with clamps and rods. Corning Incorporated manufactures consumable glass, ceramics, and plastic laboratory tools for life science research, industrial, and educational applications. Founded in 1908, Corning Inc. is headquartered in New York, NY and makes ISO-certified products.

Key Features of the JLD612 Temperature Controller 3 mode of Auto-Turning with PID AlgorithmsDual Display Setpoint and Current Fahrenheit (F) and Celsius(C)Individually programmable PID control parameters7 Different Dual Output 0.1degree resolution with pt-100 thermocouple   Specification Power:AC(85V~265V) or DC(85V~360V) Two display: Setpoint and present temperature Dual output SSR(8V, 40mA), Relay(3A 120V AC) Multiple sensor: T,R,J,B,S,K,E,Wre3 ~ Wre25 , PT100, Cu50 Accuracy: 0.2% Dimension: DIN 1/16 (48mmX48mmX82mm) (Note: Thermocouple is not included*)

Caliper, Electronic Stainless Steel Body 0-6inch/0-15cm Stainless Steel Digital Caliper, increments are .0005 inches/0.01mm.Measures either metric or SAE in the same digital caliper.

Digital biological microscope. View with 3.5" LCD screen, 40x to 400x Power and up to 1600x with 4x digital zoom, built-in 2mp digital camera, 128 MB internal memory, SD card slot, top and bottom LED illumination, mechanical stage, AC power cord, carrying case, 5 prepared slides.

This caliper has a resolution of 0.01mm/0.0005". It is accurate to 0.02mm/0.001". A black case is included for protection of your caliper. Please note that the picture is of a 6" caliper, but this item is the exact same item, just 8" long.

The Supco VG64 vacuum gauge has an LCD digital, backlit display of 0 to 12,000 micron (0 to 1,600 Pascals) range, 0.5 to 1,000 micron resolution, 1,000 micron graduation, a programmable, audible, and visual alarm for high and low vacuum, and a 1/2-second response time. A vacuum gauge measures vacuum pressure in a wide variety of test, inspection, and measurement applications in the automotive, pharmaceutical, chemical, food and beverage, and petrochemical industries. The VG64 measures vacuum in seven international units including micron, milliBar, Pascal, Torr, psi, InHg, and milliTorr. It has a built-in hanging apparatus for maneuverability. A thermistor sensor provides accurate readings, and an accessible cleaning port provides quick cleaning and sensor drying. The VG64 has a low battery indicator, and works with a 9V battery (not included) for 600 hours of continuous operation. It has a one-year, limited warranty.Specifications Sensor type Thermistor Connector type Standard, 1/4-inch male flare fitting Vacuum range 0 to 12,000 Microns (0 to 1,600 Pascal) Resolution 0 to 200: 1 Micron; 201 to 500: 5 Microns; 501 to 1,000: 10 Microns; 1,001 to 2,000: 50 Microns; 2001 to 5,000: 250 Microns; 5,001 to 8,000: 500 Microns; 8,001 to 12,000: 1000 Microns Accuracy + or - 10%, or + or - 10 Micron; whichever is larger (50 to 2000 Microns) at 75 degrees F Update rate 0.5 seconds Alarm volume 87 decibels (dB) Operating temperature range 35 to 125 degrees F (2 degrees C to 52 degrees C) Overpressure 500 PSI maximum (20 Bar) Dimensions 5.5 x 3.0 x 1.25 inches (H x W x D) Weight 6.7 ounces   H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A vacuum gauge measures vacuum pressure in a wide variety of test, inspection and measurement applications in the automotive, pharmaceutical, chemical, food and beverage, and petrochemical industries. Vacuum gauges can have analog or digital displays, and express a variety of units such as Microns, Pascal, and PSI. Sealed Unit Parts Co. (SUPCO), Inc. manufactures precision electronic and test instruments, and replacement parts for the heating, ventilation, air-conditioning, and refrigeration (HVAC) industries. SUPCO is headquartered in Allenwood, NJ, and has been in operation since 1945. What’s in the Box? VG64 Vacuum gauge Instructions

Make extremely precise measurements with this high quality stainless steel caliper. The EZ CAL Digital Caliper is fast and accurate - no more eyestrain or guesswork, thanks to its super large LCD display. It features adjustable jaws that read inside and outside dimensions, and also has an extension rod for depth measurements. The readout shows the entire measurement in inches to 0.0005", millimeters to 0.01mm and fractions of an inch to 1/128". Auto Off/On and Auto Zero functions are available at the touch of a button. Its IP54 designation ensures that it is resistant to splash water, oil and dust. Comes packaged in a sturdy plastic storage case with an extra 3V CR2032 battery.

Craftsmen who use digital calipers find that their work gets done more quickly and to a higher degree of exactitude. Handy digital caliper allows you to quickly take your measurement on various objects. This digital caliper features with a durable steel casing, extra large LCD for viewing, and a stainless steel frame. Convert to inches or metrics with a touch of a button.

Displays Millimeter, Decimal Inch and Inch Fractions. Measurements from 0-150 mm. Resolution: 0.01 mm, 0.0005 inch, 1/128 inch. Inside, Outside, Step and Depth Measurements. Precision Assembled Using High Quality Components. Hardened Stainless Steel Construction. Foam Lined Custom Storage Case and Extra Battery. Includes Detailed Instruction Manual.