Thanks for visiting our site!
Fiberglass Tank
Checkout Ebay Auctions For The Cheapest Prices
 |
 ROMATE-40 FIBERGLASS STORAGE TANK  US $100.00
|
 REDUCED 5,000 Gallon Fiberglass Tank 10' Dia. x 7' Side US $799.99
|
 516 Gallon Resin Derakane 411 w/ Nexus Fiberglass Tank US $650.00 |
 Fiberglass Tank, 1500 gallon capacity US $1,050.00
|
 FIBERGLASS TANK 2400 GALLON US $499.00
|
 1,450 gal FIBERGLASS RECTANGLE TANK US $1,000.00 |
 1000 GALLON FIBERGLASS TANK US $2,950.00
|
 Fiberglass Reinforced Poly 200 Gal Mixing Tank US $750.00
|
 Fiberglass Reinforced Poly FRP 350 Gallon Tank w Mixer US $3,000.00
|
 DAYTON FIBERGLASS WOUND WATER TANK - 120 GAL. - NEW - #5PFV2 US $300.00
|
 6078 Gallon Fiberglass Round Tank (CT2029) US $7,875.00
|
 6186 Gallon Fiberglass Round Tank (CT2028) US $7,975.00
|
 2000 Gallon Fiberglass/Plastic Chemical Storage Tank US $1,275.00
|
 Used- Air Plastics Fiberglass Storage Tank, 2050 Gallon US $1,500.00 |
 Used- Air Plastics Fiberglass Storage Tank, 2050 Gallon US $1,500.00 |
 Used- Viatec Tank, 400 Gallon, Fiberglass, Vertical. 48 US $1,000.00 |
 Used- Ershigs Tank, 400 Gallon, Fiberglass, Vertical. 4 US $1,000.00 |
 Fiberglass Reinforced Poly FRP 375 Gal Tank w Mixer US $3,500.00
|
 1200 GAL FIBERGLASS TANK, HORIZONTAL US $750.00 |
 Used- Air Plastics Fiberglass Storage Tank, 18000 Gallo US $19,000.00 |
 Used- Ohio GRP Fiberglass Storage Tank, 2000 Gallons, V US $1,500.00 |
 Used- Ohio GRP Fiberglass Storage Tank, 2000 Gallons, V US $1,500.00 |
 350 gallon fiberglass tank US $295.00 |
 7500 Gallon Fiberglass Tank Vertical Flat Bottom US $10,000.00
|
 360 GAL FIBERGLASS TANK dish bottom open top 180 DEG F BEETLE PLASTICS US $325.00 |
 3,750 gallon insulated fiberglass horizontal tank US $3,000.00
|
 600 Gallon Fiberglass Tank (RT2002) US $750.00
|
 Round 1000 Gallon Fiberglass Tank (CT1332) US $1,000.00
|
 Round 775 Gallon Fiberglass Tank (CT1327) US $800.00
|
| Powered by phpBay Pro |
Also Checkout Amazon For Related Products:
| Account limit of 2000 requests per hour exceeded. |
Here are some more information for Fiberglass Tank:
Permanent below deck, rotationally molded topside, and jerry cans are all types of plastic marine fuel tanks, often constructed in a rugged, marine-grade polyethylene material.
A below deck fuel tank is available in assorted shapes and sizes to fit most hull configurations and floor plans. A super strong, permanent fuel tank is able to hold 12 to 58 gallons, with a tank that is equipped with barded vent, aluminum withdrawal, and electric sending unit.
A topside or portable tank manufactured in a non-corrosive, lightweight material offers a perfect solution for taking extra fuel on a vessel powered with either a small or large outboard. A compact fuel tank for on deck storage comes outfitted with a multitude of features, such as a universal fuel adapter, simple-to-read gauge, vented fuel cap, and withdrawal elbow and tube. Portable cans start out at 3 gallons and range up to 24 - 26 gallons.
On a small vessel, such as a dinghy, Jon boat, or inflatable a more compact size might be more desirable, with some tanks designed to mount on the transom beneath an outboard, these fuel tanks can accept 2 to 6 gallons. In addition, a compact jerry can, in numerous sizes can accept 1 1/4 - 6.5 gallons of gasoline, kerosene, diesel, or water.
Accessories to assist in securing and using a portable unit include a hold down kit to prevent a tank for moving once on the move, a sending unit to obtain fuel level information, and a stop flow spout.
A rugged, plastic marine fuel tank to fit a dinghy, runabout to offshore fishing boat is an ideal tool to fill all fuel related requirements in an often-harsh marine environment.
If you're interested in getting a look at the latest Moeller Marine Fuel Tanks, including a variety of accessories, such as Boat Building Plans, and tips and ideas on boating, take a look at RecreationalWatercraft.com.
Fiberglass and Plastic Blowers and Fans by Tenderall Fan Co
Tenderall Fan Co. is a supplier of plastic and fiberglass fans and blowers for industry applications where aggressive media must be moved. Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.
Applications for Corrosion and Chemical Resistant Fans include:
* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical Labs
On most campuses there is a certain number of fume hoods that are used for various acids testing to break down materials for analysis. HCl and Perchloric Acid are the ones used most commonly. Fume hoods and Chemical resistant fans are needed.
* High Technology Semiconductors, PCBs, and Photonics
Chip makers use acids to clean metal before they mount thin film on the metal upon which they lay circuitry.
* Printed Circuit Board Industry
FRP fans are frequenly used for clean rooms.
* Waste water and Sewage Treatment Plants
Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor problem that has to be treated. Depending on the size of these stations corrosion resistant fans are needed. This gas can also be very volatile and will require explosion proof motor and static grounding of the fan housing by graphite impregnation that Canada Blower can provide too.
* Salt Air and High Humidity Environments
Any facility near the salt air is also a good place for plastic fans and the humidity will eat through metal fans.
* Steel and Wire Manufacturing
As the steel comes in and sits at these plants impurities and scale develop on the steel or the wire that needs to be cleaned off before the wire or steel can be properly worked with. Acid baths are needed for this and the corrosive fumes coming off these aced baths are highly corrosive...
* Stainless Steel and other Metal Production Facilities
In tha annealing and Pickling process acid baths are used to strip scale off the steel after the annealing process that smoothed out grain patterns that may have formed during the annealing process. Later on acids are used again to support oxidation.
* Chemical and Petrochemical Industries
* Jet Engine and Power Plant Turbine Manufacturing or Servicing
Molted Salt tanks are often used here to descale metals coming out of hot furnaces. Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid baths as does nickel plating.
* Electroplating and Metal Finishing
These industries use fiberglass fans and fume scrubbers.
* Scrubber OEMs and Designers
FRP fans are standard components in fiberglass srubber designs.
* Industrial Galvanizers
* Printing Press Service Shops
* Chromatography
* Food Processing
Often in the food processing industry they wash equipment down with acids and other corrosives. Also they use fans for the humidity that builds up from the drying process of foods.
* Pulp and Paper Industry
Pulp and paper manufacturers are very wide users of fiberglass and other plastics fans for their boilers, exhaust and filtration systems.
Tenderall fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. Tenderall fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.
Tenderall fiberglass fans housings are manufactured from premium grade, fire resistant resins that provide excellent corrosion resistance in most chemical environments. Tenderall FRP impellers are made of premium vinyester that combines corrosion resistance with structural integrity under the stress of rotation.
Tough applications mean tough fans and blowers by Tenderall Fan Co. Tenderall Fan Co. is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Tenderall Fan Co. also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
For additional information please refer to http://www.tenderall.com.
Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
http://www.tenderall.com/blower/index.html
About the Author
Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
Fiberglass tank leak ?
I have an older(late 70's) Dick's cycle west motorcycle tank that was designed for my GT750 Suxuki. This tank was built with a "bridge"under the tank to unite the two sides. This made the tank sit too high on the frame. I removed the hump or bridge and used a kit from the auto parts store to patch the hole. Now the tank seeps or leaks gas from this area. What I want to know is what Dick's used to bond the bottom and top of this tank together in the first place. There appears to be a thick "putty"-like substance around the whole seam. Does anyone know of a substance that will bond to ABS and fiberglass and is a thick putty like "glue" that I canuse to repair this whole area and is gas proof?
You may be able to use JB-Weld epoxy, or or a product called SMC panel repair filler, sold by local auto paint suppliers it is used for bonding or repairing Corvette door panels on. Could also be a two part gas tank repair epoxy, can be found at Murray's auto parts, Autozone, Pep-Boys, etc., etc. Good Luck
Launch pad demolition paves way for uncertain transition
Although its once-planned tenant is being scrapped, the servicing towers at the Kennedy Space Center's launch pad 39B will be demolished this summer to ready the complex for an uncertain future.
Thanks for visiting!
