Energy Products

The Master Lock rotating gate valve lockout is a lockable thermoplastic shell that surrounds and covers a gate valve handle and aligns two flanges to form a hasp with up to four holes for padlocks (sold separately) to help protect against accidental valve opening as part of a lockout-tagout (LO/TO) safety procedure required at facilities where the flow of a fluid is controlled by a gate valve. This lockout consists of two halves; one slightly smaller half fits inside the larger half when not in use, for installation in confined spaces and a compact storage footprint. To deploy, the lockout is placed over a gate valve handle, with a center hole fitting over the gate valve stem, then the inner half is rotated out to surround the rest of the gate valve handle. Where the two halves meet, flanges from each half align to form a hasp with up to four locking holes. A padlock shackle placed through any of these holes obstructs the inward rotation action of the lockout, thereby prohibiting access to the gate valve handle. Multiple locking holes provide the ability to require multiple authorizations to allow operation of a locked out gate valve during maintenance or repair. This lockout is made from red Zenex thermoplastic, which is nonconductive and functions in extreme temperatures: -50 to 350 degrees F (-46 to 177 degrees C). On the outer (or top, depending on the orientation of the gate valve,) part of the shell a small circular area can be removed to allow installation over rising stem gate valves. This product includes three (English, French, and Spanish) high-visibility warning labels with erasable areas for task-specific details. One label fits on the lockout at a time. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and help reduce accidents, during maintenance or repair. Gate valve lockouts are lockout devices that temporarily prohibit operation of gate valves by covering the handle with a lockable shell. They are often used to secure fluids in the off position during maintenance or repair when multiple workers are on the job. Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Master Lock rotating gate valve lockout is a lockable thermoplastic shell that surrounds and covers a gate valve handle and aligns two flanges to form a hasp with up to four holes for padlocks (sold separately) to help protect against accidental valve opening as part of a lockout-tagout (LO/TO) safety procedure required at facilities where the flow of a fluid is controlled by a gate valve. This lockout consists of two halves; one slightly smaller half fits inside the larger half when not in use, for installation in confined spaces and a compact storage footprint. To deploy, the lockout is placed over a gate valve handle, with a center hole fitting over the gate valve stem, then the inner half is rotated out to surround the rest of the gate valve handle. Where the two halves meet, flanges from each half align to form a hasp with up to four locking holes. A padlock shackle placed through any of these holes obstructs the inward rotation action of the lockout, thereby prohibiting access to the gate valve handle. Multiple locking holes provide the ability to require multiple authorizations to allow operation of a locked out gate valve during maintenance or repair. This lockout is made from red Zenex thermoplastic, which is nonconductive and functions in extreme temperatures: -50 to 350 degrees F (-46 to 177 degrees C). On the outer (or top, depending on the orientation of the gate valve,) part of the shell a small circular area can be removed to allow installation over rising stem gate valves. This product includes three (English, French, and Spanish) high-visibility warning labels with erasable areas for task-specific details. One label fits on the lockout at a time. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and help reduce accidents, during maintenance or repair. Gate valve lockouts are lockout devices that temporarily prohibit operation of gate valves by covering the handle with a lockable shell. They are often used to secure fluids in the off position during maintenance or repair when multiple workers are on the job. Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

Brady 65595 Mini Gate Valve Lockout made of rugged injection-molded polypropylene, our gate valve lockouts are extremely rugged for superior impact and chemical resistance. They can easily withstand temperatures from -20 to 300 degrees fahrenheit. Unique knockout center accommodates OS and Y or "rising stem" valves. Lockouts accept locks with shackles up to 3/8 inches diameter. Supplied with danger labels in english, spanish and french language.

For trouble-free dispensing of viscous noncorrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil), use Justrite's 2" gate valves and/or .75" Viscous Liquids Faucets. Flame arresters are not provided on viscous liquid faucets.

The Master Lock rotating gate valve lockout is a lockable thermoplastic shell that surrounds and covers a gate valve handle and aligns two flanges to form a hasp with up to four holes for padlocks (sold separately) to help protect against accidental valve opening as part of a lockout-tagout (LO/TO) safety procedure required at facilities where the flow of a fluid is controlled by a gate valve. This lockout consists of two halves; one slightly smaller half fits inside the larger half when not in use, for installation in confined spaces and a compact storage footprint. To deploy, the lockout is placed over a gate valve handle, with a center hole fitting over the gate valve stem, then the inner half is rotated out to surround the rest of the gate valve handle. Where the two halves meet, flanges from each half align to form a hasp with up to four locking holes. A padlock shackle placed through any of these holes obstructs the inward rotation action of the lockout, thereby prohibiting access to the gate valve handle. Multiple locking holes provide the ability to require multiple authorizations to allow operation of a locked out gate valve during maintenance or repair. This lockout is made from red Zenex thermoplastic, which is nonconductive and functions in extreme temperatures: -50 to 350 degrees F (-46 to 177 degrees C). On the outer (or top, depending on the orientation of the gate valve,) part of the shell a small circular area can be removed to allow installation over rising stem gate valves. This product includes three (English, French, and Spanish) high-visibility warning labels with erasable areas for task-specific details. One label fits on the lockout at a time. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and help reduce accidents, during maintenance or repair. Gate valve lockouts are lockout devices that temporarily prohibit operation of gate valves by covering the handle with a lockable shell. They are often used to secure fluids in the off position during maintenance or repair when multiple workers are on the job. Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

Not Available in Vermont or California. Non-rising stem. Solid wedge disc. 200 psi WOG. Meets California Prop. 65 Drinking Water Standards and ANSI/NSF 61-8.

This class 150 Milwaukee P901 series bronze gate valve has a quick-opening stem with a lever handle and female National Pipe Taper (NPT) threads on both ends. The bronze construction of the gate valve and its brass double discs provide higher strength and resistance to corrosion than steel. The valve has a brass quick-opening stem that is manually operated by turning a malleable iron lever handle, which pushes the discs into the valve’s passage to stop flow between pipes. The pressure between the two discs forms a tight seal to stop potentially dangerous fluids from leaking and mixing. With the exception of the 4" valve that has an O-ring, this valve has graphite internal stem packing. The valve has female NPT threads on both ends for connecting to male threaded pipes. The maximum pressure of this class 150 valve is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 150 psig for saturated steam pressure. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for quick draining and steam blow-off use and other heating and plumbing applications. Gate valves control flow in a piping system by lifting a gate out of the path of steam, fluids, or gases. They are designed to block or permit flow, as the vibrations and force of flow repeatedly striking a partly lowered gate can damage the gate and seats. To accommodate different flows and pressure requirements, gates come in four types: solid wedge (appropriate for almost all liquid service), flexible wedge (appropriate for steam service), split wedge (appropriate for normal temperature, non-condensing gas and liquid service, including corrosive service), and parallel disc (appropriate for high and low pressure applications). Hand wheels or levers activate the screw mechanism in the valve’s bonnet, which comes in various designs, to open and close the gate. Union bonnets are preferable for building service piping, threaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted body-bonnet connections are used primarily in iron multi-turn valves. Most gate valves have either a rising stem, which moves up and down with the gate, or a non-rising stem, which remains fixed in place. When closed, the gate and its seats form tight planar sealing surfaces, ideal for linear liquid flow. Gate valves are used in air, gas, liquid, and steam applications. The Milwaukee Valve Company manufactures manual and actuated valves, controls, and control accessories. The company, founded in 1901, and headquartered in New Berlin, WI, meets International Organization for Standardization (ISO) 9001:2008 and 14001:2004 standards.

The Master Lock rotating gate valve lockout is a lockable thermoplastic shell that surrounds and covers a gate valve handle and aligns two flanges to form a hasp with up to four holes for padlocks (sold separately) to help protect against accidental valve opening as part of a lockout-tagout (LO/TO) safety procedure required at facilities where the flow of a fluid is controlled by a gate valve. This lockout consists of two halves; one slightly smaller half fits inside the larger half when not in use, for installation in confined spaces and a compact storage footprint. To deploy, the lockout is placed over a gate valve handle, with a center hole fitting over the gate valve stem, then the inner half is rotated out to surround the rest of the gate valve handle. Where the two halves meet, flanges from each half align to form a hasp with up to four locking holes. A padlock shackle placed through any of these holes obstructs the inward rotation action of the lockout, thereby prohibiting access to the gate valve handle. Multiple locking holes provide the ability to require multiple authorizations to allow operation of a locked out gate valve during maintenance or repair. This lockout is made from red Zenex thermoplastic, which is nonconductive and functions in extreme temperatures: -50 to 350 degrees F (-46 to 177 degrees C). On the outer (or top, depending on the orientation of the gate valve,) part of the shell a small circular area can be removed to allow installation over rising stem gate valves. This product includes three (English, French, and Spanish) high-visibility warning labels with erasable areas for task-specific details. One label fits on the lockout at a time. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and help reduce accidents, during maintenance or repair. Gate valve lockouts are lockout devices that temporarily prohibit operation of gate valves by covering the handle with a lockable shell. They are often used to secure fluids in the off position during maintenance or repair when multiple workers are on the job. Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

Brady 65585 Mini Gate Valve Lockout made of rugged injection-molded polypropylene, our gate valve lockouts are extremely rugged for superior impact and chemical resistance. They can easily withstand temperatures from -20 to 300 degrees fahrenheit. Unique knockout center accommodates OS and Y or "rising stem" valves. Lockouts accept locks with shackles up to 3/8 inches diameter. Supplied with danger labels in english, spanish and french language.

Zing gate valve lockouts are made from recycled plastic and can accommodate three padlocks. Fits 1"-2.5" valves.