Energy Products

Ramsond introduces the 4th generation of its CT520DY. CT520DY is a 3-in-1 multifunction cutting and welding machine. It is a 50 Amp plasma cutter, a 200 Amp DC (Direct Current) TIG welder and a 200 Amp ARC/MMA stick welder. It is dual voltage 110V/220V and dual frequency 50/60 Hz. It is equipped with DIGITAL AMP DISPLAY, INTEGRATED PRESSURE GAUGE, FOOT PEDAL FUNCTION and FOLDABLE INSULATED HANDLE. It uses the most reliable high frequency V-MOSFETs by TOSHIBA along with PWM (Pulse Width Modulation Processor) which help deliver a constant, concentrated and precise current to the cutting/welding surface. Regardless of your training, you can achieve smooth, clean and uniform cuts (1 inch) and weld a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass and other conductive material) with minimal heat input and without distortion of metal. CT520DY is easy to use by the do-it-yourself user, while fully accommodating of the demands of professional operators. It has five controls; the ON/OFF switch, Amperage Control Knob, the Post Flow Knob, Function Selector and the foot pedal ON/OFF switch. It has an integrated air pressure gauge in the front panel of the unit, as well as a large digital display that conveniently displays the current (Amps) setting of the unit. Note: This is a DC (Direct Current) TIG Machine. For aluminum welding AC (Alternating Current) is recommended. Each Ramsond CT520DY comes fully equipped with all accessories: TIG Torch, Plasma Torch, ARC/MMA Electrode Clamp, Air Regulator/Filter, Argon Flow Meter, Set of Consumables for the plasma and TIG torches, and Ground Clamp. Plug is not included. It comes with a 1 year Limited Warranty (Parts and Labor). The consumables are readily available both through Ramsond and third party sellers and are reasonably priced.

Rated input voltage (230V) Current range TIG (10-200Amp) Rated duty (60 %) Protection class (IP)21S Insulation class (H) electrode 1.6-4 mm welding thickness 8mm Input frequency: 50 - 60Hz

This auction is for a brand new 3-in-1 multi-functional welder. This welder is made with advanced inverter technology, and they have three functions: TIG/MMA/CUT. The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOS, and then reduces the voltage and rectifies, and then output with PWM the welding and cutting power of high power factor. By using the inverter technology of switch power, the weight and volume of the mains transformer greatly reduces, while the efficiency is raised by over 30%. When working as MMA or TIG, the outer characteristic is constant current and the welding current doesn't change with the length of the arc, the current is very stable. When working as CUT, the arc is compressed by the rapid-circulating air, and then its temperature reaches 10000-15000"C in the state of ionization, thus turning into strong plasma arc. The plasma arc into cutting makes the energy more concentrating, and gets smooth arc surface, which may take convenience for later work. This industrial grade welder can be widely used in welding and cutting carbon steel, stainless steel, alloy steel, copper and other nonferrous metals. It's portable, efficient, energy-saving and stable, and the exchange cycle of the assembled machinery can be as high as 85%.

The versatile Hobart EZ TIG 165i welds 22-ga. - 3/16in. steel and is a versatile performer for auto body shop, fabrication, home hobbyist, metal art, vocational training and sign fabrication operations. U.S.A. Volts: 230, Amps: 165, Duty Cycle: 20% at 150 Amps, Amperage Adjustments: Infinite, Range Selection: 10-165, Weldable Metals: Mild steel, stainless steel, aluminum, steel/chrome moly, Weld Thickness (in.): 22-ga. to 3/16, Electrode Size (in.): 3/32 collet & collet body w/2% ceriated tungsten, Electrode Cable Length (ft.): 12 1/2, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Power Cord (ft.): 10, Dimensions L x W x H (in.): 17 x 9 7/8 x 23 7/8

Power voltage(V) 230 Rated input current(A) 19 Output current range(A) 10~200 Preheat time(S) 0~2 Delay time(S) 2~10 Attenuated time(S) 0~5 Arc strike time HF No-load voltage(V): 60 Rated output voltage.(V): 18 Insulation class: F Efficiency(%) 80 Duty cycle(%) 60 Weight(KG): 22 Machine size(MM) 495x330x390

Model and Color May Very Features: - Voltage: 110 Vlt - Frequency: 60 Hz - Required Current: 26 Amp - Single Phase - Amperage Control: 45 To 100 Amp - Welds Up To 1/4" Mild Steel - UL Listed - Up To 100% Duty Cycle Include: 1 Pc Welders Shield 1 Pc Stinger - Compact And Easy To Handle - Perfect For Home Projects And Maintanance

Two welders in one! Manual Metal Arc welding (MMA) uses versatile stick electrodes. Or add a TIG torch and use as a TIG welder on a wide range of ferrous metals. ?Turbo fan cooling prevents overheating Gas fittings, regulator and TIG torch are sold separately. Input: 240 volts, 16-25 amps, single phase, 60 Hz Rated output current: 10 to 130 amps Rated output voltage: MMA: 32 volts @ 130 amps, TIG: 23volts @ 130 amps Max open circuit voltage: 75 volts Duty cycle: 40% at 130 amps, 60% at 120 amps, 100% at 80 amps Electrode capacity: 1/16" to 3/32" Weldable materials: Mild steel, low alloy steel, and stainless steel (not suitable for aluminum) Material thickness: MMA: 18 gauge (1/4" thick), TIG: 22 gauge (1/8" thick) Includes: 1/8" collet body, 1/16"& 3/32" collets, size 5 & 6 gas nozzles, long and short back caps, 1/16"& 3/32" (one each) EWG tungsten electrodes, three 1/8" stick electrodes Weight: 20.22 lb.

The Arc One I 100 STS is the newest addition to our inverter product line. Weighing in at 10 lbs, this rugged 115 volt machine truly puts out 100 amps so don't hesitate to use 1/8" rod.

Thermal Arc W1003203 95S DC TIG and Stick PackagePart # W1003203The Thermal Arc W1003203 95S DC Tig/Stick provides Excellent Portability! Lightweight at under 10 lbs. with easy to carry shoulder strap.  Easy to use! Simple, user friendly set-up and operation.  The Single Amperage Range allows the operator to accurately set the welding amperage.  The 95S Tig/Stick welder provides Thermal Overload Protection this alerts the operator if duty cycle is exceeded or airflow is blocked.  The W1003203 is cable & plug Fitted! Supplied with 115VAC primary cable and plug. Also the 95S Package has Twist Lock Output Terminals! 25mm dinse style allows for easy polarity changing and cable connection.Thermal Arc 95S W1003203 Includes:20 Amp adapter plug & cable Victor Cutskill Argon regulator / flowgauge 95S Inverter Power Source Operating manual Quick set up DVD Tig Torch 17V style 10ft (3m) with accessories Tweco Weldskill style electrode holder with 10ft (3m) lead Tweco Weldskill style ground clamp with 10ft (3m) lead

- Easy low amp 5 amp start DC, 20 amp AC. - Compact inverter design makes it one of the lightest and smallest AC/DC IGBT based inverter welders in its class. (Compare to Miller Diversion series.) - Simple, yet fully functional controls allow any user to make high quality welds. - Smooth stable arc in DC or AC with excellent wet in. - Automatic pre-flow and post-flow greatly simplify setup and operation. - Digital readout for precise control of welding amps in 2T mode. - 2T Function with the torch switch or the optional Foot pedal gives operator choices in out of position welding situations. - DINSE 25/50 style connectors allow easy adaptation of aftermarket torches and quick setup. -For portable use: Requires a Generator designated as "Clean Power" and capable of a MINIMUM 5000 W of continuous output. May require higher output, for best results