Thanks for visiting our site!
Irrigation Plumbing
Checkout Ebay Auctions For The Cheapest Prices
 |
 BUTTERFLY VALVE 2" LUG NEW; IRRIGATION PLUMBING PROCESS  US $44.39
|
 BUTTERFLY VALVE 2" WAFER IRRIGATION PLUMBING PROCESS US $40.59
|
 BUTTERFLY VALVE 6" LUG NEW; IRRIGATION PLUMBING PROCESS US $125.28
|
 BUTTERFLY VALVE 4" LUG NEW; IRRIGATION PLUMBING PROCESS US $81.44
|
 BUTTERFLY VALVE 6" WAFER IRRIGATION PLUMBING NEW US $117.92
|
 BUTTERFLY VALVE 4" WAFER IRRIGATION PLUMBING PROCESS US $71.04
|
 (90) Pc. Mix of PVC Plumbing & Irrigation Pipe Fittings US $49.00
|
 BUTTERFLY VALVE 12" WAFER IRRIGATION PLUMBING PROCESS US $435.54
|
 BUTTERFLY VALVE 12" LUG 200 IRRIGATION PLUMBING PROCESS US $502.74
|
 BUTTERFLY VALVE 10" WAFER IRRIGATION PLUMBING PROCESS US $291.48
|
 BUTTERFLY VALVE 3" WAFER IRRIGATION PLUMBING PROCESS US $50.56
|
| Powered by phpBay Pro |
Also Checkout Amazon For Related Products:
 |
Goulds GT20 Irrigator - 2 hp Irrigation Pump Sale Price: $380.00  |
|
FEATURES: Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe. Serviceable: ? Back pullout design allows disassembly of pump for service without disturbing piping. ? Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. APPLICATIONS: Specifically designed for the following uses: ? Lawn sprinkling ? Irrigation ? Air conditioning systems ? Heat pumps ? Water transfer ? Dewatering GENERAL GT SERIES SPECIFICATIONS Pump: ? Pipe connections: 1½" NPT suction 1½" NPT discharge ? Capacities: to 110 GPM at 5 foot suction lift ? Heads: to 128 feet ? Reprime capabilities: to 25 feet suction lift ? Maximum working pressure: 125 PSIG ? Maximum water temperature: 140° F (60° C) ? Rotation: clockwise when viewed from motor end. Motor: ? NEMA standard open drip proof ? 60 Hz, 3500 RPM ? Stainless steel shaft ? Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset. |
 |
Genova Products 30305CP 1/2-Inch Female Iron Pipe Thread PVC Pipe Adapter Slip by Female Iron Pipe Thread - 10 Pack List Price: $12.99 Sale Price: $1.67 |
|
10 Pack, 1/2', Schedule 40, Pressure Female Adapter. |
 |
Endot Industries 3/4X100 160 Psi Pipe Pbj07541010003 Polyethylene Pipe Nsf Approved List Price: $31.99 Sale Price: $38.71 |
|
3/4' x 100', 160 PSI Working Pressure, Coil Polyethylene Pipe, National Sanitation Foundation Approved. |
 |
Genova Products 30307CP 3/4-Inch Female Iron Pipe Thread PVC Pipe Adapter Slip by Female Iron Pipe Thread - 10 Pack List Price: $12.99 Sale Price: $2.00 |
|
10 Pack, 3/4', Schedule 40, Pressure Female Adapter. |
 |
Dawn Industries SS200 1-7/8-Inch Black Handle Original KwikCut PVC Cutter List Price: $19.49 Sale Price: $16.61 |
|
Dawn Industries SS200 1 7/8 The Original KwikCut, Black Multi purpose cutter designed to make quick work of thin wall PVC, Poly Pipe, Hose and Tubing. Our blade is forged from the longest lasting, highest quality metal. This creates a blade that is sharper and holds its edge longer for more clean, precise cuts Dawn Industries SS200 1 7/8 The Original KwikCut, Black Features: PVC cutter Multi purpose cutter designed to make quick work of thin wall PVC, poly pipe, hose and tubing Blade forged from longest lasting, highest quality Stainless Steel Black 1-7/8" |
 |
Flex-Drain 50110 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 25-Foot List Price: $22.99 Sale Price: $13.30 |
|
Flex-drain 50110 flexible/expandable landscaping drain pipe, solid, 25-foot a solid pipe, appropriate in applications that involve moving water from one point to another (i.e. Away from downspouts). Does not allow water to seep in or out anywhere except pipe ends. Works effortlessly with our complete system of connectors, couplers and adaptors. Exceeds all applicable astm standards. Made with no-break copolymers for professional grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30-percent higher load-bearing rating than standard corrugated pipe. Guaranteed not to split, crack or break when used in accordance with local building codes. Flex-drain is compatible with virtually all traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc. All flex-drain products are made in america. |
 |
Genova Products 30310CP 1-Inch Female Iron Pipe Thread PVC Pipe Adapter Slip by Female Iron Pipe Thread - 10 Pack List Price: $12.99 Sale Price: $2.39 |
|
10 Pack, 1', Schedule 40, Pressure Female Adapter. |
 |
Socket Fusion Tool Kit TK-100 List Price: $319.95 Sale Price: $316.50 |
|
You are a geothermal contractor, perhaps a loop installer and would like to equip your crew with the best tools available. So look no further because when it comes to socket fusion we offer one of the most advanced tools available on the market today. TOOL FEATURES PIPEFUSER comes with 1600 Watt (total), 120VAC double heating elements for faster heating time, equivalent to having two tools in one PIPEFUSER has an ergonomic plastic handle and a fold-out stand for stability The thermostat control dial is infinitely adjustable for temperatures of up to 570 F PIPEFUSER comes in handy in tight spaces due to its narrow profile Heater adapters are manufactured in accordance with ASTM F 1056 and are coated with stick-resistant material Two pairs of heater adapters can be connected at a time if needed PIPEFUSER carries s two-year limited warranty WHAT IS INCLUDED? TK-101 Heater Tool, dual wattage (800W and 1600W), 120 VAC, with 13' power cable Four pairs of bolt-on Heater Adapters (¾'', 1'', 1-1/4'' and 1-1/2'' - IPS) Ratchet Pipe Cutter Tape Measure Hex Key Sturdy Carry Case |
 |
Heat Shrink Kit Std Wl Clr 3wr Sale Price: $4.10 |
|
Excellent dielectric strength and can be shrunk over a large diameter connector and still effectively seals watertight down to a small diameter cable. |
 |
Lasco Fittings 1 1/2" Slip Cross 420-015 List Price: $5.24 Sale Price: $3.66 |
|
1.5 inch slip Cross Fitting |
Here are some more information for Irrigation Plumbing:
Underground Irrigation
Hard wiring has been the interior design rage for some time now. Stereos, kitchen appliances, computers and phone systems with their wiring concealed inside walls, under floors and carpets. Hard wired houses let users operate appliances without all that fiddly plugging stuff in and unplugging other stuff – without tripping over wires, or leaving unsightly umbilical trails of cable all over the place. Underground irrigation does basically the same thing, for gardens: an underground irrigation system hard wires all the unsightly pipes and valves necessary for modern watering, under turf and into soil.
An underground irrigation system is no different to any other fixed watering setup. Gardeners still have control over where they site their nozzles, what time water is dispensed and in what quantity. The only change is that the piping in an underground irrigation system is completely concealed (and protected from strimmer damage) beneath the earth.
There's no unsightly hose, coiled like a dead snake in a puddle of its own water; no dripping nozzle; no trailing sprinkler wire. The underground irrigation system uses pop-up nozzles (uni- and multi-directional) powered by water pressure: when the water is turned on, the force of the pressure buildup squeezes the nozzle out of its housing. Once the nozzle has risen, its pre-determined settings (type of spray, spray direction and duration) dictate how it dispenses water. The lawn sprinkler, for example, in an underground irrigation system, generally rises in the centre of a turfed area and expels a rotating fan of fine mist. The bedding nozzles of an underground irrigation system will pop up and spray jets over designated areas of ornamental borders.
The watering advantages of underground irrigation are obvious. No water is wasted and no plants are accidentally ruined by a dragging hosepipe. Other advantageous properties of underground irrigation: with all the piping safely buried underground, a careless swipe with a strimmer, lawnmower or set of shears is impossible. The piping in an underground irrigation system is made of tough polyethylene, with proper plumbing-type joints and fittings, so it resists subterranean attack by moles too.
Underground irrigation is primarily designed for large-area watering, rather than targeted root system watering. Baskets and planters, obviously, can't be included in an underground irrigation system: besides, their delicate plants require drip watering, which targets specific root bunches rather than the whole pot. An underground irrigation setup can be timed, just like a drip system: the network of pipes can be connected either to simple "egg timer" style control units, or digital ones capable of holding multiple seasonal programs. The subterranean valves in an underground irrigation setup can be linked in to a timing relay so that designated areas of garden are watered at proper times and frequencies.
It won't do the really fiddly bits, then, but for the broad canvas underground irrigation is clean, efficient, modern and surprisingly easy. Once the garden is hard-wired (Colibri do a good range of pop-up sprinkler heads and systems), watering it in large areas is as easy as pressing a switch. Nothing to plug in, attach, turn or trip over – just neat, effective irrigation.
About the Author
Amazon Irrigation Ltd provides Modern garden irrigation equipment and land irrigation systems like water sprinklers. Underground irrigation is primarily designed for large-area watering, rather than targeted root system watering. For more information please visit http://www.amazon-irrigation.com/acatalog/Underground_Irrigation_System.html
Plumbing issue: Effect of reducers in water line?
I have a well that feeds the house. There is a large accumulator tank after the pump. The fella that put it together used 2" white PVC after that and fed the line to the house down into the concrete pumphouse floor (75 feet from the house) and he fed a similar line down to feed the irrigation pipes. Everything is 2".
I am planning on re-plumbing the system so that I can shut off the whole thing or just the house/just the irrigation. I also want to insert a whole house water filter in the line for the house. Most of the filters I've seen either have 3/4" or 1" fittings. Am I going to have any issues reducing the 2" line down to the smaller fitting and then back up to 2"? I'm sure that he reduced that 2" pipe down to 1/2 or 3/4 somewhere en route to the house's plumbing... I just am concerned about the effect (if any) of the extra reduction and expansion to accomodate the filter. I think the system is set for around 50-55 PSI if it matters. Thanks!
i dont see any problems arising from this, with all the 2" pipe the volume of water alone should give you plenty of pressure. After you reduce, you shouldnt have to increase coming out of the filter in other words if you went in to the filter or reduced down right before the filter and came out 1/2" or3/4" you need not increase back up to 2". this is assuming that your filter is situated outside along house wall or in garage, if the filter is 75' from the house, you will probably want to increase back up coming out of the filter to keep the water volume and pressure up.
Do you have pool? Check out this survey
If you have a piped pool, lawn-irrigation system, a piped boiler or other specific plumbing services, you may need to install a backflow prevention device.
Thanks for visiting!
