Energy Products

Ramsond introduces the 4th generation of its CT520DY. CT520DY is a 3-in-1 multifunction cutting and welding machine. It is a 50 Amp plasma cutter, a 200 Amp DC (Direct Current) TIG welder and a 200 Amp ARC/MMA stick welder. It is dual voltage 110V/220V and dual frequency 50/60 Hz. It is equipped with DIGITAL AMP DISPLAY, INTEGRATED PRESSURE GAUGE, FOOT PEDAL FUNCTION and FOLDABLE INSULATED HANDLE. It uses the most reliable high frequency V-MOSFETs by TOSHIBA along with PWM (Pulse Width Modulation Processor) which help deliver a constant, concentrated and precise current to the cutting/welding surface. Regardless of your training, you can achieve smooth, clean and uniform cuts (1 inch) and weld a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass and other conductive material) with minimal heat input and without distortion of metal. CT520DY is easy to use by the do-it-yourself user, while fully accommodating of the demands of professional operators. It has five controls; the ON/OFF switch, Amperage Control Knob, the Post Flow Knob, Function Selector and the foot pedal ON/OFF switch. It has an integrated air pressure gauge in the front panel of the unit, as well as a large digital display that conveniently displays the current (Amps) setting of the unit. Note: This is a DC (Direct Current) TIG Machine. For aluminum welding AC (Alternating Current) is recommended. Each Ramsond CT520DY comes fully equipped with all accessories: TIG Torch, Plasma Torch, ARC/MMA Electrode Clamp, Air Regulator/Filter, Argon Flow Meter, Set of Consumables for the plasma and TIG torches, and Ground Clamp. Plug is not included. It comes with a 1 year Limited Warranty (Parts and Labor). The consumables are readily available both through Ramsond and third party sellers and are reasonably priced.

This auction is for a brand new 3-in-1 multi-functional welder. This welder is made with advanced inverter technology, and they have three functions: TIG/MMA/CUT. The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOS, and then reduces the voltage and rectifies, and then output with PWM the welding and cutting power of high power factor. By using the inverter technology of switch power, the weight and volume of the mains transformer greatly reduces, while the efficiency is raised by over 30%. When working as MMA or TIG, the outer characteristic is constant current and the welding current doesn't change with the length of the arc, the current is very stable. When working as CUT, the arc is compressed by the rapid-circulating air, and then its temperature reaches 10000-15000"C in the state of ionization, thus turning into strong plasma arc. The plasma arc into cutting makes the energy more concentrating, and gets smooth arc surface, which may take convenience for later work. This industrial grade welder can be widely used in welding and cutting carbon steel, stainless steel, alloy steel, copper and other nonferrous metals. It's portable, efficient, energy-saving and stable, and the exchange cycle of the assembled machinery can be as high as 85%.

This auction is for a brand new 3-in-1 multi-functional welder. This welder is made with advanced inverter technology, and they have three functions: TIG/MMA/CUT. The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOS, and then reduces the voltage and rectifies, and then output with PWM the welding and cutting power of high power factor. By using the inverter technology of switch power, the weight and volume of the mains transformer greatly reduces, while the efficiency is raised by over 30%. When working as MMA or TIG, the outer characteristic is constant current and the welding current doesn't change with the length of the arc, the current is very stable. When working as CUT, the arc is compressed by the rapid-circulating air, and then its temperature reaches 10000-15000"C in the state of ionization, thus turning into strong plasma arc. The plasma arc into cutting makes the energy more concentrating, and gets smooth arc surface, which may take convenience for later work. This industrial grade welder can be widely used in welding and cutting carbon steel, stainless steel, alloy steel, copper and other nonferrous metals. It's portable, efficient, energy-saving and stable, and the exchange cycle of the assembled machinery can be as high as 85%.

As one of the largest manufacturers of plasma cutting, tig/stick, arc welding equipment in the world, Lotos Technology is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machine with the CT520D. Lotos CT520D is a THREE-IN-ONE Digital Inverter Plasma Cutter (50A) / Tig Welder (200A) / Stick (MMA) welder (180A). You would have to purchase 3 separate machines to do what this ONE machine can do! Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less hazards, simply less overall work and a better, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. The torch head is adjustable for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cut faster with less distortion in the work piece. The Tig welder from this CT520D is clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! An ARC (Stick) welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). With arc welding, no shielding gas is required. Stick welding is cheap and effective: fill the large gaps and holes, weld the cast iron and weld the extra thick steel with the stick. For this Lotos 2011 latest model, we add the aluminum stick welding feature. It is patent pending. For demonstrations, please check out Check these videos: http://www.youtube.com/watch?v=XRw5wltOaI0 http://www.youtube.com/watch?v=jwRuLzxXy4Y http://www.youtube.com/watch?v=X_t2_h_HiKw For tig welding http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/0/ZSpNM6fyr-E For aluminum cutting: http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/1/_wHtPuu63ZY

1. Advanced design, high invert frequency, high duty cycle, saving energy. 2. Reactive power correction, IGBT, AC/DC or pulse output , soft switch, inverter with 100 kHz high frequency; 3. Compact structure, stable welding current, steady and intensive arc, reliable and durable, easy for maintenance; 4. Excellent control performance, multiple functions of TIG, MMA and CUT ; 5. The model function of pulse 6. Thermostatic protection, over-voltage protection, over-current protection, under-voltage protection, pedal control interface for safe operation; 7. Complete accessories: welding torch, welding holder, earth clamp, compressed air regulator, etc. 1. Foot pedal; 2.Clamp: 16m?*2m 200A; 3.Arc torch: 16m?*2m 200A; 4. Argon torch: WP-26; 5. Cut torch:PT-31 6. Air regulator Product Features: 1. IGBT inverter technology. Pulse welding, 2T/4T control. 2. High efficiency and energy saving. Small, light and portable. 3. Easy to start the arc, stable welding current with fast response. Silent, little spatter, nice form of welded seam. 4. Over-voltage and over-current protection. 5. Multi-purpose welding machine. Suitable for TIG , MMA and Plasma Cut.

Specifications: ? High quality square wave current, speed current transform, stable arc , no need to use HF to stable the arc ? Concentrated heat, solid arc, easy to fill in the wire ? Strong capability for clearing oxidation film, the clear width can be adjusted continuously and the welding seam is beautiful and bright ? Unique technology, gather many types of functions, can meet teh demands of butt welding, angle welding, cutting, etc. ? Much more perfect welding craft, newest machine on supporting multiple functions ? Widely used in aluminum, carbon steel, stainless steel, cooper and titanium welding, etc. ? With complete accessories Technical Paramters: ? Built-in Gas Solenoid Valve for the argon ? Argon Regulator with Bubble Flow Meter ? Power Voltage: AC240+5%, 50Hz ? Rated Input Current: 28 ? Power Capacitance: 5.2 KVA ? Rated Output Current: 200A ? Range Of Output Current: 20-200A (20-50A) ? No-Load Voltage: 62V (220V) ? Working Voltage: 32V (100V) ? Pre-Flow (s): 0-2 ? AC Output Frequency (Hz): 60 ? Clean Width : 20-90 ? Slope-Down Time (s): 0-5 ? Tail-Gas Time (s): 2-10 ? Remote Control: YES ? Arc-Leading: HF Vibration ? Efficiency : 85 ? Rated Duty Cycle : 60 ? Power Factor: 0.93 ? Insulation Class B ? Protection Class: IP21 ? Max. Welding Thickness (mm): 12 mm Steel (10 mm Aluminum) ? Max. Cutting Thickness (mm): 16mm Free Accessories: ? Plasma cutting torch ? Tig Welding Torch ? Ground cable with clamp. ? Initial cutting consumables (tips, electrodes, o-rings and shield cups) ? Stick (ARC) Holder ? Current Control ? Air Regulator ? Air Pipes ? User Manual ? You shall provide 60~70 psi air supply, 110vac or 220vac power plug for plasma cutting ? You shall provide argon tank for tig welding

*** Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.) *** Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm. *** Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span. See Picture Below ! *** Advanced inverter technology means high cutting and welding performance. *** The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service *** Plasma Cutter is 3/4" rated with 1" severance cuts *** Tig Welder has a 5/16" weld thickness and a high frequency non-contact start. *** Arc/MMA Welder has a 3/16" weld thickness *** CE, CCC, CSA and ISO-9001 certification ***It comes with: * Plasma cutting torch with 16.5 ft (5m) hose. * Tig Welding Torch with 11 ft hose (with long and short caps) * Ground cable (9 ft) with clamp. * Stick (ARC) Holder * Initial Consumables * User Manual *** You shall provide 60~70 psi air supply, 110v or 220v power plug for plasma cutting *** You shall provide argon regulator and tank for tig welding

* High working efficiency / DC output.... * High working efficiency / DC output.... *Equipped with an advanced inverter technology and high cutting frequency V-MOSFET from TOSHIBA/FUJI... * Certification: CE, CCC, CSA and ISO-9001 certification.... ** Package Includes:.... * Plasma Cutter -Inverter Unit.... * Ground Cable& Ground Clamp.... * SG-55 High Performance Cutting Torch with initial consumables..... * TIG Torch with initial consumables..... * Air Filter / Regulator, Hose, Clamps, Mounting Bracket..... * Owner's manual.... ** Buyer must provide: * Air supply - 4.5 CFM @ 75 PSI.... * 220 or 110 V AC power source & plug..... * Argon Tank for TIG welding.... ** Specifications: * Input voltage AC 110/220±15% 50/60Hz.... * Input Power Capacitance 7.1 kva.... * No-load loss(W) 40.... * Duty cycle (%) 60.... * Power factor 0.93.... * Efficiency (%) 85.... * Insulation class B.... * Protection class IP21 TIG MMA CUT.... Input current(A) 21 32 28.6.... Rated output current 200A 200A 50A.... Current range 15-200 15-200 20-50.... No -load voltage(V) 62 62 250.... Cut thickness(mm) - - 1-16.... Arc-leading HF vibrate Touch HF vibrate....

EXCEL CT520DX - Advanced DC inverter MMA/TIG/CUT welder (3 in 1) With Dual Voltage! 1. Advanced MOSFET inverter technology, high working efficiency, DC output; 2. Compact structure, convenient to carry, reliable and durable, easy for maintenance; 3. Multi-function of TIG and MMA welder as well as air plasma cutting; 4. We also can provide 110/220 v dual automatic input voltage shift; or 110v voltage input, 5. Air cooling, thermostatic protection, suitable for DIY; 6. Complete accessories: welding torch, cutting torch, welding holder, earth clamp, compressed air regulator, ect.; Includes: 1.Clamp: 16mã?¡*2m 200A; 2.Arc torch: 16mã?¡*2m 200A; 3.Argon torch: WP-26; 4.Cut torch: pt-31 5. Air regulator Product Features: 1. Mosfet inverter technology. 2. Dual input voltage. The power supply suit either 220V AC or 110V AC. 3. High efficiency and energy saving. Small, light and portable. 4. Easy to start the arc, stable welding current with fast response. Silent, little spatter, nice form of welded seam. 5. Over-voltage and over-current protection. 6. Multi-purpose welding machine. Suitable for TIG , MMA and Plasma Cut.

*NOTE: This item does not come with a plug end as it is powered to run as 110v or 220v. Items IncludedInverter DC TIG/ARC (MMA) Welder Cutting Machine.10' TIG Torch10' 50A Cutting TorchMMA clamp & cableGround clamp & cableTIG cap (long)Argon Regulator (US type)Air Regulator(11) x Plasma Tip(11) x Plasma Electrode(6) x Plasma Shield Cup(5) x Plasma Swirl Ring(5) x TIG Collets(5) x TIG Collet Body(4) x TIG Nozzle(2) x 1/4" barbed air hose fittings(2) x 1/4" hose clamps(1) x Quick connect fittingOwners ManualFeaturesAdvanced inverter technology, small size and light weight, easy to carry, Creative, effective and low cost.Three functions integrate to be one: MMA, TIG and CUT, widely used, convenient operation, understandability, and production efficiency improved greatly.Suited for steel, stainless, plating steel, aluminum, copper, titanium, nickel and other alloy material, as well as all kinds of metal plates. Cuts up to 3/4" thick.Fan-cooled, automatic protection of over-voltage and over-current, thermostatic protection, moveable welding cable.CE APPROVED,OEM ACCEPT,DIGITAL DESIGN ACCEPT.LIGHT AND SMALL ,HF ARC. Digital display.1 year warranty.