Energy Products

Plastic Droppers (pipettes)- Graduated in 1/2 ml increments up to 3ml and can easily dispense 1 drop at a time. We recommend using a separate dropper for each essential oil. Note: our 5ml, 10ml, 15ml and 1oz bottles of essential oils include an internal dropper so these plastic droppers are not necessary. But, for larger sizes (2oz or larger), you'll need droppers. You'll also need them for our vials of essential oils sold in our Aromatherapy Starter Kits. For Essential Oils, we do NOT recommend the use of glass droppers with a rubber bulb. The essential oils causes the rubber to deteriorate rapidly. Our plastic droppers are not impervious to the essential oils but usually last for years, especially if you occasionally clean them with alcohol and let them dry out. Helpful hint: attach each dropper to it's bottle with a rubber band - that way you do not mix your essential oils. Sold only in groups of a dozen.

Diesel / Biodiesel Pumps 40, 60 & 80 Series Light Oil Pumps Not for use with vegetable oil and other such heavy oils These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. The primary function of this pump is for fueling vehicles with an automatic nozzle. The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped (usually by a nozzel) The pump should not be left on for a long period of time when restricted, as it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread, most NPT fittings can be made to fit when using yellow teflon tape. Technical Paramters Model 40 Series 60 Series 80 Series Pump Flowrate 20-40 L/min 5.25-10.5 gpm 20-60 L/min 5.25-15.75 gpm 20-80 L/min 5.25-21 gpm Voltage 12v DC 110v AC 110v AC Max Working Pressure 3 Bar (44 psi) 3 Bar (44 psi) 3 Bar (44 psi) Power Consumption 150 Watts 370 Watts 550 Watts Port Size 3/4 1" 1" Maximum Suction Height 5 Meters (16 feet) 5 Meters (16 feet) 5 Meters (16 feet) Maximum Lift 10 Meters (32 Feet) 10 Meters (32 Feet) 10 Meters (32 Feet) Self-Priming Yes Yes Yes Length of Wire(s) 6 feet 57 inches 57 inches Pump Type Vane Vane Vane Duty Cycle 30 Minutes Continuous Continuous

Diesel / Biodiesel Pumps 40, 60 & 80 Series Light Oil Pumps Not for use with vegetable oil and other such heavy oils These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. The primary function of this pump is for fueling vehicles with an automatic nozzle. The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped (usually by a nozzel) The pump should not be left on for a long period of time when restricted, as it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread, most NPT fittings can be made to fit when using yellow teflon tape. Technical Paramters Model 40 Series 60 Series 80 Series Pump Flowrate 20-40 L/min 5.25-10.5 gpm 20-60 L/min 5.25-15.75 gpm 20-80 L/min 5.25-21 gpm Voltage 12v DC 110v AC 110v AC Max Working Pressure 3 Bar (44 psi) 3 Bar (44 psi) 3 Bar (44 psi) Power Consumption 150 Watts 370 Watts 550 Watts Port Size 3/4 1" 1" Maximum Suction Height 5 Meters (16 feet) 5 Meters (16 feet) 5 Meters (16 feet) Maximum Lift 10 Meters (32 Feet) 10 Meters (32 Feet) 10 Meters (32 Feet) Self-Priming Yes Yes Yes Length of Wire(s) 6 feet 57 inches 57 inches Pump Type Vane Vane Vane Duty Cycle 30 Minutes Continuous Continuous

Diesel / Biodiesel Pumps 40, 60 & 80 Series Light Oil Pumps Not for use with vegetable oil and other such heavy oils These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. The primary function of this pump is for fueling vehicles with an automatic nozzle. The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped (usually by a nozzel) The pump should not be left on for a long period of time when restricted, as it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread, most NPT fittings can be made to fit when using yellow teflon tape. Technical Paramters Model 40 Series 60 Series 80 Series Pump Flowrate 20-40 L/min 5.25-10.5 gpm 20-60 L/min 5.25-15.75 gpm 20-80 L/min 5.25-21 gpm Voltage 12v DC 110v AC 110v AC Max Working Pressure 3 Bar (44 psi) 3 Bar (44 psi) 3 Bar (44 psi) Power Consumption 150 Watts 370 Watts 550 Watts Port Size 3/4 1" 1" Maximum Suction Height 5 Meters (16 feet) 5 Meters (16 feet) 5 Meters (16 feet) Maximum Lift 10 Meters (32 Feet) 10 Meters (32 Feet) 10 Meters (32 Feet) Self-Priming Yes Yes Yes Length of Wire(s) 6 feet 57 inches 57 inches Pump Type Vane Vane Vane Duty Cycle 30 Minutes Continuous Continuous

CTA Tools 2497 8-in-1 Transfer Case with Differential Plug Wrench is designed for the Automotive industry. These wrenches offer 16 different socket sizes to fit most Oil Drain, Transfer Case and Differential Plugs. Features offset head design with heavy-duty yoke support to withstand high torque applications. Superior indexing feature locks socket into working position, smooth handle with nickel plate for easy maintenance and durability and heavy-duty magnet built into handle. Sizes: Male Square - 8mm. 10mm. 3/8-Feet, 1/2-Feet . Male Hex - 10, 12, 14, 17mm. OAL: 10-1/2-Inch/27cm.

Oil Transfer Pump, Pump Ratio 1:1, Consumption @ 100 PSI 7 CFM, Maximum Air Inlet Pressure 140 PSI, Minimum Air Inlet Pressure 40 PSI, System Pump for Multiple Outlets No, Control Gun, 20 Feet Hose

JB T30251 Oil Transfer Pump

The Fill-Rite diesel fuel transfer pump delivers diesel fuel or light oils. Not to be used for dispensing gasoline, alcohol, or waste vegetable oil to be used for biodiesel fuel. U.S.A. HP: 1/5, Watts: 240, Flow (GPM): 10, Speed (RPM): 2,800, Amps: 20, Max. Total Head (ft.): 30, Max. Suction Lift (ft.): 6 1/2, Inlet Port (in.): 3/4, Outlet Port (in.): 3/4, Discharge (ft.): 23 1/2, Duty Cycle: 30min., Self-Priming: Yes, Bypass Valve: Yes, Seal Type: Lip, Nozzle Type: Swivel, Hose (in. x ft.): 3/4 x 8, Dimensions L x W x H (in.): 7 1/8 x 3 3/4 x 5 1/8

Mini-Gear Oil Pump All Metal Pump This pump may be used for pumping oily liquids such as diesel, biodiesel or kerosene. It can pump vegetable oil with a continuous duty cycle if the oil is not too thick. Generally speaking, vegetable oil will need to be around 75° F or higher, depending on how thick it is for this pump to maintain a continuous duty cycle. This pump works excellent for biodiesel processor applications. It is not recommended for pumping heavy oils such as motor oil as the duty cycle is greatly reduced. The mini-gear pump is a pump attached to the motor by a shaft. The pump itself is all metal (metal gears) and can pump hot fluids without overheating the detached motor. The motor is high power and has thermal protection, which will automatically shut off the pump in case of the risk of overheating. These pumps create powerful suction and are self-priming. They can run dry for intermediate amounts of time, allowing for the use of a suction hose for collecting fluids from a tank. These pumps are so powertful they will actually pull and push air through the hose. The metal gears which drive the pumping action can handle a lot of fluids, even if partially dirty. In the case of vegetable oil, any soft particles will pass right through the pump wilth no problems, and are often pulverised by the gears themselves. Hard materials, such as metals, should not be allowed to pass through the pump to prevent damage.

The Fill-Rite diesel fuel transfer pump delivers diesel fuel or light oils. Not to be used for dispensing gasoline, alcohol, or waste vegetable oil to be used for biodiesel fuel. HP: 1/5, Flow (GPM): 10, Speed (RPM): 2,800, Amps: 20, Max. Suction Lift (ft.): 6 1/2, Inlet Port (in.): 3/4, Outlet Port (in.): 3/4, Duty Cycle: 30min., Self-Priming: Yes, Bypass Valve: Yes, Seal Type: Lip, Dimensions L x W x H (in.): 7 1/8 x 3 3/4 x 5 1/8