Energy Products

This incredible 3x Magnifying Plastic Sheet by Trademark Tools is nearly paper thin and lightweight. It's great for reading, school projects and anywhere you need magnification. The lightweight construction and durable plastic allow you to carry the 3x Magnifying Plastic Sheet anywhere without the worry of damaging it. Have instant magnification on wherever you need it with the 3x Magnifying Plastic Sheet by Trademark Tools.

Textured ABS sheet is ideal for making custom trim plates for radios, EQs, crossovers and more.

Textured ABS sheet is ideal for making custom trim plates for radios, EQs, crossovers and more.

As a screening medium, perforated plastic has many advantages. The holes in our perforated plastic products are accurate and uniform in size, shape and spacing. The sheet surface is smooth, firm, easily cleaned and sterilized. Perforated PVC is durable and is commonly used in the construction building industry.

Textured ABS sheet is ideal for making custom trim plates for radios, EQs, crossovers and more.

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses (0.015 inches, 0.030 inches and 0.060 inches) are also available in sheets which are etched on one side to make them bondable to other materials with most general purpose epoxies. Our stock sizes are cut from rolls and the material may be slightly curved, but it can easily be flattened by applying pressure to the whole surface.

Durable power punch tool for punching accurate round holes through all types of materials. From thin brass metal to plastic sheet through 16 gauge mild steel. Features with an adjustable edge guide, easily lets you align holes in a straight line 1/4" to 1-1/2" inches from the edge. Package comes with seven quick-change, durable heat treated punch-and-die sets. Sizes from 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32 inch. Punch opens to 1/4 inch; throat depth: 1-3/4 inches. Set completes with a durable plastic storage case

High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin's.