Thanks for visiting our site!
Sheet Plexiglass
Checkout Ebay Auctions For The Cheapest Prices
 |
 Mirror Acrylic Sheet 1/8" x 24" x 48" - Gold Plexiglass  US $44.93
|
 5 Sheets Clear Plexiglass 15" x 4" x 3/32" w/Cover US $9.95
|
 5 Sheets Clear Plexiglass 10" x 3" x 3/32" in paper US $4.95
|
 black acrylic plexiglass sheet 1/8" 48" x 23.7/8 " US $34.00
|
 Acrylic Sheet 1/8" x 16" x 20" - Clear Plexiglass US $6.07
|
 ACRYLIC PLEXIGLASS SHEET CLEAR CAST 3/4"x 60" x 23.7/8" US $210.00
|
 PLEXIGLASS SHEET CLEAR 3/4" x 23.7/8" x 5.7/8" US $21.00
|
 Clear Acrylic Plexiglass Sheet - 12" x 36" - 3/16" Thick US $19.49
|
 ACRYLIC PLEXIGLASS SHEET CLEAR 1/8"x 5.7/8" x 5.7/8" US $5.00
|
 Palram Palsun Polycarbonate Plexiglass sheet Clear UV Protected 30 x 24 x 1/2" US $39.00
|
 Clear Acrylic Plexiglass Sheet - 24" x 36" - 3/16" Thick US $33.01
|
| Powered by phpBay Pro |
Also Checkout Amazon For Related Products:
 |
Polycarbonate Sheet, ASTM D3935, Clear, 1/4" Thick, 12" Width, 24" Length Sale Price: $20.66  |
|
Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C). |
|
Polycarbonate Sheet, ASTM D3935, Clear, 1/8" Thick, 12" Width, 24" Length Sale Price: $13.61 |
|
Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C). |
 |
ABS Textured Plastic Sheet 1/16 Thick x 12 x 24 Sale Price: $3.50 |
|
Textured ABS sheet is ideal for making custom trim plates for radios, EQs, crossovers and more. |
 |
Sheet Magnifier 2x 8 1 2 x 11 inches Sale Price: $7.95 |
|
This Sheet Magnifier has a 2x magnification level and enlarges an entire page at a time. Made of durable, yet flexible plastic, this sheet magnifier can be tucked into a book or tote bag for traveling. Great for menus, road maps and of course, books. |
|
Polycarbonate Sheet, ASTM D3935, Clear, 1/16" Thick, 12" Width, 24" Length Sale Price: $10.84 |
|
Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C). |
|
ABS Textured Plastic Sheet 1/8 Thick x 12 x 24 Sale Price: $7.25 |
|
Textured ABS sheet is ideal for making custom trim plates for radios, EQs, crossovers and more. |
 |
Acrylic Sheet, Smooth UL 94HB, Clear, 0.118" Thick, 24" Width, 48" Length Sale Price: $27.96 |
|
Extruded acrylic sheet is a continuously processed acrylic sheet that is crystal clear, impact resistant and weather resistant. It offers high molecular weight for superior thermoforming, bending and flame polishing. Acrylic sheet is one of the most durable thermoplastic materials for resisting scratches. |
 |
Safety Acrylic Sheet Glazing (Plexiglass) List Price: $287.90 Sale Price: $255.58 |
|
For storm door windows or any glass areas which are most likely to be struck by your family or pets. Economical, safer than annealed glass, easy-to-install, and shatter-resistant. Optix acrylic is certified to meet the ANSI (American National Standards Institute) Z97.1-1994 standard. .080 (5/64"), .100 (1/10"), .118 (1/8") approximate thicknesses.These states have safety laws in effect: Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho (Building Code), Illinois, Indiana (Building Code), Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri (effective 1/1/77), New Jersey, New York, North Carolina (Building Code), Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Virginia, Washington, West Virginia, and Wisconsin. 5% volume discount available on order of 10 cartons or more, assorted. To quality for this volume discount orders must be phoned into the Do it Best Corp Order Department Monday thru Friday 7:30 - 5:00. Phone 260/493-3555 or contact the 2600 department. Do not place order through your Retail Wizard. |
 |
Plaskolite 1AU0187A Safety Acrylic Sheet Glazing (Plexiglass) (Pack of 10) Sale Price: $94.90 |
|
*** (This item sold as a pack of 10) ***For storm door windows or any glass areas which are most likely to be struck by your family or pets. Economical, safer than annealed glass, easy to install, and shatter resistant. Optix acrylic is certified to meet the ANSI (American National Standards Institute) Z97.1 1994 standard. .080 (5/64''), .100 (1/10''), .118 (1/8'') approximate thicknesses.These states have safety laws in effect: Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho (Building Code), Illinois, Indiana (Building Code), Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri (effective 1/1/77), New Jersey, New York, North Carolina (Building Code), Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Virginia, Washington, West Virginia, and Wisconsin. |
 |
Weld-On 16 Acrylic Cement - 5 Oz Sale Price: $13.50 |
|
WELD-ON 16 is a very high strength, clear, medium bodied, fast curing, solvent-type acrylic cement. Applied to cast, molded or extruded acrylics, it will affect initial bonds very quickly so some parts may be handled within a few minutes. Bond strength continues to develop very rapidly reaching a substantial level and forming strong joints within hours. This product may be thinned with WELD-ON 3 by approximately 10%. Initial bond forms very quickly so some parts may be handled within a few minutes of application. Joints are water and weather resistant and will generally have similar physical and chemical properties to acrylic plastic. Color: Clear Contents of Tube: 5 oz (44 ml) |
Here are some more information for Sheet Plexiglass:
First and foremost, you'll need to prepare some important items to build your own solar cell. These items include the following:
o Copper Sheeting
o Clear Plexiglass/Perpex/Acrylic Sheeting
o Some Thin Wood Strip
o copper Wire
o Duct Tape
o Metal Guillotine
o Bandsaw
o Electric Ring Hob
To get started, cut a square of the copper sheeting so that it is about 6-8 in. square in size. It is much easier to do with a metal guillotine, however, if you haven't got access to this sort of equipment, tin snips will work just fine.
After you've done this, wash your hands thoroughly and dry them. You need to remove any grease or oil from your hands that could cause problems with the next step of the process. Remove any grease or detritus from the copper sheeting. Next, take a piece of emery cloth and thoroughly sand down the piece of copper on both sides to remove the top layer of oxidized copper. This will leave you with nice bright shiny red copper underneath.
You now need to heat treat the copper, in order to form an oxide coating on top. It may sound counter intuitive that we have just removed all the oxide and now we are going to put oxide back on, but the oxide coating we will be applying will be a film of "cuprous oxide".
You need to turn the burner to the highest setting, with the sheet of copper just placed on top. Observe the changes to the copper carefully, they are very interesting. As you heat the copper, it takes on a lovely vivid patina of different colours.
If you have access to nitric acid, you can use this as a superior method for removing the upper cupric oxide layer.
You will see a black crusty oxide from on top of the copper plate. If you leave the plate to cool slowly, the crusty layer should become fairly fragile and separate easily from the underlying copper. When you have allowed the plate to cool thoroughly, give the plate a firm bang edge-on to a hard surface. Some of the oxide will pop off. Rub the oxide gently with your fingers under a tap, and you will find most of the black layer od oxide comes off easily. If any bits are stubborn, do not under any circumstances scour them, as we do not want to damage the fragile surface.
Under this black layer of oxide, you will find another layer of a reddish orange rust colour. This is the layer which is "photosensitive" and will make out thin-film solar cell work.
Make a spacer now from some thin strips of wood. Use duct tape to join your pieces of wood together. Do not use metal fixings as they could react electrolytically with the other components of the cell.
We are now going to make another electrode. It has to have the property that it does not touch the other piece of the solar cell, and allows light to hit the surface. We are going to use salt water as our other electrode, making contact with the whole surface of the thin film cell, yet conducting electricity. We are then going to immerse another copper wire to make the connection. You could equally use another piece of copper plate around the outside of the thin-film cell, but not touching our oxidized copper.
In a commercial thin-film cell, tin oxide is commonly used as the other electrode, as it is clear and yet conducts electricity.
Now take a piece of Perspex to act as a cover plate, and stick a strip of duct tape on either side.
We are going to stick our other electrode wire to this piece of Perspex.
Use thickish wire for clarity, with few actual zigzags so that you can clearly see what is going on. To optimize the performance of your solar cell, you want to make the conductor large. To this end , you are better using lots of thinner gauge wire in a much finer zigzag pattern - this will still allow the light to get through, but at the same time gives a large conductor area.
You can experiment with different types of wire and copper - the trick is to try and maximize the surface area of the copper, while trying to block as little light as possible from reaching the solar cell.
Fold the duct tape over and stick the wire to the plate.
We are now going to combine the electrode plate with the space. Again, duct tape makes this a nice easy job.
Next, we are going to take the copper plate, and stick duct tape to one side, with the sticky side of the tape facing the same direction as the layer of red copper oxide.
Combine the plate and the front module to make the finished solar cell.
Now, take a little salt water, and fill the void between the Perspex front section and the copper plate. Seal the module with duct tape all round to prevent leakage.
Lastly, connect your module to a multimeter, find a bright light source, and explore some of the electrical properties of your solar cell.
Explore the highly recommended Home Solar Power Systems site that provides you with wealth of information on solar panels, uses, benefits and many other informative tips on saving electricity. Visit Earth For Energy today; master the true knowledge of using solar energy.
6 Unique Decorating Tips for Halloween
Thinking about decorating for Halloween? Here are some tips on what you can do to make your home stand out from the rest!
1. Fake Spider Webs - Creating fake spider webs is not complicated yet you see so many people decorating their homes with clumps of cotton that looks like they were taken out of the bag and thrown on the wall. Try to make it look somewhat realistic. Stretch the cotton material until it becomes a silky transparent thread. You want it to look real enough that it will fake a real spider. Another idea for spider webs is using dark threading hanging from the ceiling in front of the door. Note: this will only work in a dark setting. Wet the strings so when guests enter your house they'll walk through the web and get freaked out!
2. Floating Skulls - This is one of my favorites. You need a TV or monitor, a DVD (preferable) or a VCR, a video of a head or skull, a large sheet of glass or plexiglass. Lay the TV/Monitor facing up right below the window where you want the image displayed. Have the top of the TV/Monitor facing the wall. Place the glass or plexiglass above the TV at a 45 degree angle where one side is resting on the bottom of the TV and the other side is resting on the window. Make sure the video of the skull is adjusted where the area surrounding the head is dark. The end result is a floating head in the window. For more dramatic effects, you may want to add a background surrounding the area.
3. Lighting - You want to create the right ambiance. Replace the light bulbs on your chandelier and your front porch with a black light. You can even add a strobe light for a more
4. Tomb Stones - These are pretty easy to make. You need Styrofoam which you can get from a local arts and crafts store or Lowes, grey primer, and acrylic paint. Cut out the shape for the tomb stone, paint it with primer, and write the epitaph. Roughen the edges to give it a weathered look. You can also create a cross with two pieces of boards and nail them together in a shape of a cross. You may want to break pieces off the end or burn parts of the cross to make it appear old or weathered.
5. Birds - You can add fake crows and perch them on a tree, bush, or anywhere in your front yard.
6. Michael Meyers in the windows - This is relatively easy. Get a jump suit from a thrift store or ask a mechanics garage for an old outfit, get the Michael Meyers mask which can be found in virtually any Halloween store, get some construction gloves, newspaper, a fake or dull kitchen knife, double stick tape, a long stick with bottom support or a coat hanger with removable hangers, and a directional light. Stuff the jumpsuit with all of the newspapers. Stick long newspapers in the forearms so that the newspaper sticks out of the sleeves later to be used to stuff the gloves. Stuff the mask with newspaper as well. Cut a hole in the butt are of the jumpsuit and stick the support through until it reaches out of the neck area. Stick the mask on top of this portion of the support. Use the double stick tape and wrap it around the knife and close one of the gloves around the knife. Stand the figure in front of a window and place the light facing up so that it shines on Michael Meyers face.
About the Author
Halloween is the one time out of the year where you can pretend to be anything you want and express yourself freely without being judged. If you are looking for more ideas for Halloween, go to http://www.helpfulhalloweentips.com - Thanks for reading and I hope you have a safe and Happy Halloween!
Where can I buy acrylic sheets or plexiglass in Delhi India?
You should be able to get it at any home improvement or hardware store in your area.
BMW 740i Wears the M Badge of Courage for $13,200! [Nice Price Or Crack Pipe]
# nicepriceorcrackpipe When the Bangle-ized E65 7-series was released, the values of the preceding E38s immediately rose. Things have obviously settled down as this Nice Price or Crack Pipe contender 740i has a price that's styled for mass appeal. More »
Thanks for visiting!
