Energy Products

Auto-Helm AH88 Series Helmets powers up by solar power, and reacts automatically when you weld in a 1/10000 second time frame. This helmet is very easy to use, you can adjust the shades that you need to use, protect your eyes, and will last for many years before replacing the solar battery. They weigh barely 1lb, so you will forget that its even on you. The wide viewing window lens is 90 x 40mm so you can see everything that you want to weld. You can use this helmet for welding with MIG, TIG, or ARC welders. Auto-Helm Helmet Darkens the Instant You Start Welding. It Adjusts from a Variable Dark Shade #9 to #13, & clears to a Light shade #4. Auto-darkening lens never needs batteries and charges with exposure to welding or sunlight (solar powered). Extra wide viewing area for better performance (extra lens available). Padded ratcheting headgear with sweatband and light weight composite body reduces user fatigue. Exceeds ANSI Z87 Standards and Protects user from UV & IR Radiation. Darkens in 1/10,000 of a second and best of all, it has a shade adjustment control inside the helmet where it won't accidentally get knocked out of adjustment, which means no surprises.

Premium solar powered welding helmet that comes with three unique designs. These helmets fully meet industry standards: auto-darkening lens responds in 1/25000 seconds, darkens when welding begins and clears when welding stops, shades can be switched easily and continuously between shades from 9 to 13 with 1/10000 seconds reaction time, UV and IR protection are in compliance with EN169 standards for welding filters, and the design and construction meet ANSI Z87.1 standards for eye protection devices. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The unique designs make them more than great welding helmets.

The shield lens darkens instantly when welding begins and clears when wielding stops. Switch easily between shades from 9 to 13 with 1/10000 second reaction time. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The helmet meets ANSI Z87.1 standards.

Believe it or not, but the designer of this item actually uses this magnifier to light his smoke. He says it has helped him to slow down his habit because there are not that many sunny days in Paris. The very flat lens, also called a Fresnel Lens magnifies up to 2.5. Probably best used for tiny print. Really, it is a cool little object. To use, slide open the magnifier. Hold it perpendicular to the sun at least 5-inches away from the surface to get the minimal focal point. Look for the pinhole in the shadow for positioning. Focus point is very bright. Don't look directly at focus point. Use with caution and always follow fire safety rules.

Vaper 41267 Solar Powered Auto Dark Welding Helmet features a solar powered auto darkening welding helmet. The durable, light weight material is corrosion resistant and flame retardant. The ultra high performance filters protects against UV and IR. It automatically changes from a light to a dark state when an arc is struck. It returns to normal when the welding stops with dark to clear adjustments available. It has variable shades from DIN 9 to DIN 13. The outside sensitivity adjustments provides clear vision both prior and during welding. The special turnover headband mechanism allows for greater comfort and reduces fatigue. It utilizes high performance solar cells with 2 built-in 3V lithium batteries as power back-up. It complies with DIN, ISO, EN safety standards and ANSI Z87.1-2003 standards. The replacement lenses include: 4.5x3.5 inch and part includes: 41264.

Thermometer is always-on and runs for years powered from light in lab or plant. Efficient and cost-saving solar panels make unit environmentally attractive. Monitor ambient temperature or temperatures of liquids, air/gas, and semisolids. View from across the room on a large LCD. Dedicate to one test: Perfect thermometer for measuring temperatures of solutions in tanks, water baths, incubators, and refrigerators. Sensor and cable perform accurately even when under water. It’s ideal for food inspection, petroleum tests, quality control, biomedical studies, R/D analysis, and wastewater tests. Reads in degree F or degree C at the flick of a switch. Display updates every 10 seconds to save time and eliminate 3-minute lag inherent in glass and dial thermometers. Resolution is 0.1 degree . Accuracy is +/-1 degree C. Thermometer sits on bench, has slot for wall mounting, and is supplied with Velcro to attach to any surface. Traceable to NIST for accuracy: To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with solar panels, backup battery for dim areas, external 3/16" diameter by 4/5" sensor, and 10-foot cable. Unit measures 2-3/4" length by 2-3/4" width by 3/4" thick and weight is 2 ounces.

Specifications: Great For ARC & MIG Welding Lithium Battery Powered with Soloar Backup Up to 5000 Working Hours Welding or Grinding Selection View Window: 3-3/4" x 1-3/4" Goggle Assembly: 4-3/8" x 3-3/8" Adjustable Sensitivity Outside Helmet Dark State Level: 9-13 Continuous Dark to Clear Delay Adjustment Molded Nylon Construction Replaceable Clear Cover Lens Auto State-Change Reaction Time: 0.0001 Seconds Recovery Time: 0.05 Seconds Automatic Power ON And OFF Protects From UV And IR Radiation Simple And Compact In Structure Easy To Use Wide View Area Excellent Performance Maximum Safety Security Heavy Duty Nylon Construction Heat Resistant Weld Splatter Resistant Full Head Cover Ratchet Headband

The Mitutoyo 500-784 is one of Mitutoyo’s Series 500 MyCal Solar Absolute Digimatic Calipers and measures 0” to 6” or 0 to 150 mm with +/- 0.001” or +/- 0.010 mm accuracy. It is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology. Coolant-proof, it meets IP 67 standards with a dust-tight, waterproof, oil-proof, and damage-resistant construction. Its hard-coated solar panels protect the solar cells storing energy for operation. Through solar power, you can measure in any location (even low-lit areas) without the need to replace batteries. This digital solar caliper has .295-inch/7.4-mm LCD characters with a five-digit display and easy-to-reach function control buttons, such as Inch/Metric to convert from inch to metric measurements and On/Off to automatically shut off the caliper after 30 minutes. Its solar battery retains its origin point for life (even after the caliper has remained in complete darkness), without requiring the caliper to zero-set its LCD display due to low light intensity. Although identical to dial and vernier calipers in its ability to make precise measurements, this digital solar caliper also has the LCD, which clearly shows values and increases reading reliability over the other types. The 500-784’s LCD also reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point—even after shutoff. In environments with available light of 60 Lux or more, the caliper becomes active and you can immediately start measuring, without zero resetting or worrying about overspeed errors. You can make and compare incremental measurements without having to subtract the first measurement from the second. The 500-784 is IP67 rated for dust, water, and oil protection. It has the ABSOLUTE electromagnetic induction linear encoder and hard-coated solar panels, for increased durability in storing energy in solar cells for safe operation. It weighs approximately 1 lb (453 g) and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. Outside Jaw Depth is 1.57”/ 39.87 mm, Inside Jaw Depth is .65”/16.51 mm, Upper Jaw Length is 1.57”/ 39.87 mm, and Lower Jaw Length is 1.57”/ 39.87 mm. Range is 0 to 6"/0 to 150 mm, LCD Resolution is .0005"/0.01 mm, Repeatability is .0005"/0.01 mm, and Accuracy is rated + or - 0.0001"/0.02 mm. Also included are inch/metric and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (959143), sold separately. An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. The caliper has no SPC (Statistical Process Control) output capability. The built-in solar cells can store energy for up to three hours of caliper operation. The caliper can be used continuously above 60 Lux (or luminous fLux) ambient illumination. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada. The Mitutoyo 500-784 comes in a fitted, plastic case.

The Mitutoyo 500-785 is one of Mitutoyo’s Series 500 MyCal Solar Absolute Digimatic Calipers and measures 0” to 8” or 0 to 200 mm with +/- 0.001” or +/- 0.010 mm accuracy. It is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology. Coolant-proof, it meets IP 67 standards with a dust-tight, waterproof, oilproof, and damage-resistant construction. Its hard-coated solar panels protect the solar cells storing energy for operation. Through solar power, you can measure in any location (even low-lit areas) without the need to replace batteries. This digital solar caliper has .295-inch/7.4-mm LCD characters with a five-digit display and easy-to-reach function control buttons, such as Inch/Metric to convert from inch to metric measurements and On/Off to automatically shut off the caliper after 30 minutes. Its solar battery retains its origin point for life (even after the caliper has remained in complete darkness), without requiring the caliper to zero-set its LCD display due to low light intensity. Although identical to dial and vernier calipers in its ability to make precise measurements, this digital solar caliper also has the LCD, which clearly shows values and increases reading reliability over the other types. The 500-785’s LCD also reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point—even after shutoff. In environments with available light of 60 Lux or more, the caliper becomes active and you can immediately start measuring, without zero resetting or worrying about overspeed errors. You can make and compare incremental measurements without having to subtract the first measurement from the second. The 500-785 is IP67 rated for dust, water, and oil protection. It has the ABSOLUTE electromagnetic induction linear encoder and hard-coated solar panels, for increased durability in storing energy in solar cells for safe operation. It weighs approximately 1.24 lb (562 g) and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. Outside Jaw Depth is 1.97”/50 mm, Inside Jaw Depth is .79”/20 mm, Upper Jaw Length is 1.97”/50 mm, and Lower Jaw Length is 1.97”/50 mm. Range is 0 to 8"/200 mm, LCD Resolution is .0005"/.01 mm, Repeatability is .0005"/.01 mm, and Accuracy is rated + or - 0.001"/.02 mm. Also included are inch/metric and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (959143), sold separately. An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. The caliper has no SPC (Statistical Process Control) output capability. The built-in solar cells can store energy for up to three hours of caliper operation. The caliper can be used continuously above 60 Lux (or luminous fLux) ambient illumination. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada. The Mitutoyo 500-785 comes in a fitted, plastic case.