Energy Products

New Page 1 4pc Mini Magnetic Welding Holder Holds Work at 45 Degree, 90 Degree, 135 Degree Angles Maximum Weight Capacity per Magnet: 10lb. Compact Design High Gloss Enamel Plates New

Ramsond introduces the 4th generation of its CT520DY. CT520DY is a 3-in-1 multifunction cutting and welding machine. It is a 50 Amp plasma cutter, a 200 Amp DC (Direct Current) TIG welder and a 200 Amp ARC/MMA stick welder. It is dual voltage 110V/220V and dual frequency 50/60 Hz. It is equipped with DIGITAL AMP DISPLAY, INTEGRATED PRESSURE GAUGE, FOOT PEDAL FUNCTION and FOLDABLE INSULATED HANDLE. It uses the most reliable high frequency V-MOSFETs by TOSHIBA along with PWM (Pulse Width Modulation Processor) which help deliver a constant, concentrated and precise current to the cutting/welding surface. Regardless of your training, you can achieve smooth, clean and uniform cuts (1 inch) and weld a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass and other conductive material) with minimal heat input and without distortion of metal. CT520DY is easy to use by the do-it-yourself user, while fully accommodating of the demands of professional operators. It has five controls; the ON/OFF switch, Amperage Control Knob, the Post Flow Knob, Function Selector and the foot pedal ON/OFF switch. It has an integrated air pressure gauge in the front panel of the unit, as well as a large digital display that conveniently displays the current (Amps) setting of the unit. Note: This is a DC (Direct Current) TIG Machine. For aluminum welding AC (Alternating Current) is recommended. Each Ramsond CT520DY comes fully equipped with all accessories: TIG Torch, Plasma Torch, ARC/MMA Electrode Clamp, Air Regulator/Filter, Argon Flow Meter, Set of Consumables for the plasma and TIG torches, and Ground Clamp. Plug is not included. It comes with a 1 year Limited Warranty (Parts and Labor). The consumables are readily available both through Ramsond and third party sellers and are reasonably priced.

As one of the largest manufacturers of plasma cutting, tig/stick, arc welding equipment in the world, Lotos Technology is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machine with the CT520D. Lotos CT520D is a THREE-IN-ONE Digital Inverter Plasma Cutter (50A) / Tig Welder (200A) / Stick (MMA) welder (180A). You would have to purchase 3 separate machines to do what this ONE machine can do! Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less hazards, simply less overall work and a better, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. The torch head is adjustable for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cut faster with less distortion in the work piece. The Tig welder from this CT520D is clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! An ARC (Stick) welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). With arc welding, no shielding gas is required. Stick welding is cheap and effective: fill the large gaps and holes, weld the cast iron and weld the extra thick steel with the stick. For this Lotos 2011 latest model, we add the aluminum stick welding feature. It is patent pending. For demonstrations, please check out Check these videos: http://www.youtube.com/watch?v=XRw5wltOaI0 http://www.youtube.com/watch?v=jwRuLzxXy4Y http://www.youtube.com/watch?v=X_t2_h_HiKw For tig welding http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/0/ZSpNM6fyr-E For aluminum cutting: http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/1/_wHtPuu63ZY

Features & Benefits - All-in-one portability - Compact, yet powerful TIG welding/Plasma cutting features - Easy to use controls with simple selector switch for process changeover - Quick change out of torches for easy change from TIG to plasma back to TIG - Low power consumption due to inverter design - High duty cycle at rated amperages for TIG/Stick/Plasma - Over Current indicator warns when duty cycle has been exceeded - Clean and smooth plasma cuts on virtually any metal - Weld almost any metal - Exceptional arc stability for TIG/Stick functions - Suitable for use with 9500W "clean power" generators.

The Lotos LTPDC2000 is designed and constructed to withstand extensive use in rugged industrial and construction environments. It is perfect for any home project too. Lotos LTPDC2000 is a THREE-IN-ONE Digital Inverter Plasma Cutter (50A) / Tig Welder (200A) / Stick (MMA) welder (200A). You would have to purchase 3 separate machines to do what this ONE machine can do! Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. The torch head is adjustable for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cut faster with less distortion in the work piece. The Lotos LTPDC2000 is packed with the full features of each of the separate machines. The Tig welds from this LTPDC2000 are clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld... It's that simple! This machine will weld steel, stainless steel, molybdenum, and ferrous alloys. An ARC (Stick) welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). With arc welding, no shielding gas is required. Stick welding is cheap and effective: fill the large gaps and holes, weld the cast iron and weld the extra thick steel with the stick. In many ways stick arc welding is like MIG except there is no wire feed, you have to do that manually. Videos For tig welding: http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/0/ZSpNM6fyr-E For aluminum cutting http://www.youtube.com/user/lotosteck?feature=mhum#p/a/u/1/_wHtPuu63ZY

Miller 907460 Diversion 180 AC/DC TIG WelderPart # 907460Miller Diversion 180 Features: Easy-to-understand operatorinterface.1. Power-up2. Select material type3. Set material thickness rangethen weld! Its as easy as 1, 2, 3.Inverter-based, AC/DC powersource provides a more consistent welding arc while using less power. Portable. Whether its in the shop, garage or at the race track, at 50 lb they can be taken anywhere.Diversion 180 includes RFCS-RJ45remote foot control and a multi-voltage plug (MVP) which allows connection to 115 or 230 V receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord.HF start for non-contact arc starting that eliminates tungsten and materialcontamination.Fan-On-Demand reduces noiseand maintenance by lessening theamount of airborne contaminantspulled through the machine, whilesufficiently cooling thermallyprotected internal components.Portable. Whether its in the shop,garage or at the race track, at 50 lbthey can be taken anywhere.Auto-Postflow protects the weldend zone and electrode byoptimizing post flow time basedon welding amperage.Advanced Squarewave AC providesa fast freezing weld puddle anddeeper penetration.Miller Diversion 180 Specifications:Diversion 180 Input Power:115 and 230V, Single Phase PowerDiversion 180 Rated Output:150A at 16V, 20% Duty Cycle Diversion 180 Welding Amperage Range:115V:  10-125A AC/DC230V:  10-180A AC/DCDiversion 180 Max. Open-Circuit Voltage:80Diversion 180 Net Weight:50 Lbs (23 kg)

The shield lens darkens instantly when welding begins and clears when wielding stops. Switch easily between shades from 9 to 13 with 1/10000 second reaction time. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The helmet meets ANSI Z87.1 standards.

Features & Benefits -Stable, smooth DC arc -Low Power Consumption -Industry standard for class 35%duty cycle at rated amps. -Portable with -Automatic Hot Start for reduced electrode sticking -Adaptive Arc force control -Digital Display for easy current setting and repeatability -DINSE 25mm style connectors for easy connection -Lift Start DC TIG setting for steel and stainless welding -17V series with manual gas valve built into torch handle -140 Amp, Dual Voltage 120/240V. (100 amp max output on 120V.)

This auction is for a brand new 3-in-1 multi-functional welder. This welder is made with advanced inverter technology, and they have three functions: TIG/MMA/CUT. The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOS, and then reduces the voltage and rectifies, and then output with PWM the welding and cutting power of high power factor. By using the inverter technology of switch power, the weight and volume of the mains transformer greatly reduces, while the efficiency is raised by over 30%. When working as MMA or TIG, the outer characteristic is constant current and the welding current doesn't change with the length of the arc, the current is very stable. When working as CUT, the arc is compressed by the rapid-circulating air, and then its temperature reaches 10000-15000"C in the state of ionization, thus turning into strong plasma arc. The plasma arc into cutting makes the energy more concentrating, and gets smooth arc surface, which may take convenience for later work. This industrial grade welder can be widely used in welding and cutting carbon steel, stainless steel, alloy steel, copper and other nonferrous metals. It's portable, efficient, energy-saving and stable, and the exchange cycle of the assembled machinery can be as high as 85%.

The versatile Hobart EZ TIG 165i welds 22-ga. - 3/16in. steel and is a versatile performer for auto body shop, fabrication, home hobbyist, metal art, vocational training and sign fabrication operations. U.S.A. Volts: 230, Amps: 165, Duty Cycle: 20% at 150 Amps, Amperage Adjustments: Infinite, Range Selection: 10-165, Weldable Metals: Mild steel, stainless steel, aluminum, steel/chrome moly, Weld Thickness (in.): 22-ga. to 3/16, Electrode Size (in.): 3/32 collet & collet body w/2% ceriated tungsten, Electrode Cable Length (ft.): 12 1/2, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Power Cord (ft.): 10, Dimensions L x W x H (in.): 17 x 9 7/8 x 23 7/8