Energy Products

Miller Electric # 907321 Millermatic 252 Mig Welder 33LB .035" 70S-6 SPOOL MILD STEEL WIRE INCLUDED. Highest output in its class (250 A at 28 VDC). Weld longer on high end applications.New! Large, digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.New! Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun, or push/pull gun. Automatically detects and recalls the voltage, wire feed speed, and timer of the active gun.New! Push-Pull Gun Direct Connect - now directly connects your push-pull gun, no extra module required. New! Angled, dual-gear driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob. New! Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.New! EZ-Access Consumable Compartment and Parameter Chart - set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.New! Larger work area - now with longer 15-ft M-25 gun. Less weld cleanup with Active Arc Stabilizer pateneted Miller design provides excellent starts proven superior to the competition.Fan-On-Demand coooling system operates only when needed reducing power consumption and contaminants drawn into the machine.Line voltage compensation keeps power constant even if input voltages varies by 10%. ProcessMIG (GMAW) Flux Cored (FCAW) SpecificationsInput PowerRequires 1- phase power Rated Output200 Amps at 28 VDC, 60% duty cycle 250 Amps at 28 VDC, 40% duty cycle Welding Amperage Range30 - 300 Amps Wire Speed 50 - 700 IPM (1.3 - 17.8 m/min) Net Weight207 lb (94 kg)

***Additional delivery time may apply. Please contact Weldfabulous for inventory availability.***

AutoArc 130 Welder by Hobart

Welds thickest material in its class! The Millermatic® 211 Auto-SetTM with MVPTM has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V.

The Hobart 770177 0.030-Inch MIG Contact Tips fit Millermatics, Hobart Handler models 125, 135, 140, 175 & 180, Hobart IronMan 250, and later model Beta-MIG 1800 & 2510 welder. Features: Compatable with several make and model MIG welders What's In The Box: Five Hobart 770177 0.030-Inch MIG Contact Tips

The Millermatic 140 mig welder with Auto-Set offers all the benefits of the standard Millermatic 140, but adds Auto-Set to eliminate the guesswork. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Simply set the wire diameter, set the material thickness, and go! The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).

The Millermatic(r) 180 Auto-Set is an all-in-one wire welding package that welds 24 gauge to 5/16 in (0.8 - 7.9 mm) mild steel. This compact, portable MIG welder delivers a maximum output of 180 amps and is ideal for maintenance, auto body and fabrication projects. The Millermatic(r) 180 is easy to use and move. Processes MIG (GMAW) Flux Cored (FCAW) (gas and self-shielded) Applications Light Industrial Applications Light Fabrication Maintenance and Repair Auto Body Farm and Ranch Home Features: Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork! Smooth-Start patent-pending technology provides a smooth, spatterfree start. It's the best-starting machine in the small MIG machine category. No pop gun starts and no spatter to clean up. Infinite Voltage Control with Manual

Miller Electric # 907405 Millermatic 212 Auto-Set mig welder Welds material from 22 gauge to 3/8 in thick in a single pass.Welding Capability Not to scaleMild SteelAluminum*Min 22 ga (0.9 mm)Min 14 ga (1.9 mm)Max 3/8" (9.5 mm)Max 3/8" (9.5 mm) * w/Spoolmate 200 Series Spool GunNew! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.Manual Mode allows you to manually set weld parameters for broader applications.NEW! Infinite voltage control replaces "tap" settings which means you can now "dial in" precise weld voltage and wirefeed speed when using the Manual Mode.Compatible with Spoolmate 200 Series spool gun! The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed. (Spoolgun sold seperately).NEW! Line Voltage Compensation keeps welding output constant even if power input varies by +/- 10%.NEW! No more replacing mechanical output contactors. Our built-in solid-state contactor circuit makes wire electrically "cold" until the trigger is pulled, and gives you life-long welding output and performance.NEW! Reduce Maintenance and Operating Costs with our Fan-On-Demand cooling system that only operates when needed, reducing power consumption and contaminants drawn into the machine.EZ-Access Consumable Compartment and Parameter Chart - convenient new flip-down compartment that provides fast access to parameter chart and consumables.Larger work area - now with longer 15-ft M-25 gun.Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.Compatible with Bobcat welder/ generators.  SpecificationsInput Power208/230 V, 1-Phase, 60 Hz Rated Output160 Amps at 24.5 VDC, 60% duty cycle Welding Amperage Range30 - 210 Amps Wire Speed 50 - 700 IPM (1.3 - 17.8 m/min) Net Weight178 lb (81 kg)

Miller # 195149 Protective Cover for Millermatic 135, 140, 175, 180 and 211 Auto-Set Heavy-duty canvas, water-resistant, and mildew-resistant. Protects and maintains the finish of the machine.

The Hobart Handler 190 is designed to deliver 190 Amps of professional welding performance in a portable, compact case of a Handler. Plus, you get exclusive use of Hobart SpoolRunner 100 spoolgun - no other spoolgun will work with the Handler 190. This powerful machine delivers the ability to weld mild steel, solid wire, flux core and stainless filler metals and can easily be configured to weld from 18-gauge to 1/4 aluminum in a single pass with the included SpoolRunner 100 direct plug spoolgun. Just plug in the spool gun and flip the switch from MIG to spoolgun. U.S.A. Volts: 230, Amps: 190, Duty Cycle: 30, Mig Ready: Yes, Wire Feed Speed Control: Infinite, Weldable Metals: Steel, aluminum, stainless, Weld Thickness (in.): 24 ga. to 5/16 in. steel in single pass, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Optional regulator, hose, built-in gas solenoid, Welding Wire Diameter (in.): 0.024, 0.030, 0.035, Power Cord (ft.): 10, Cart: No, Dimensions L x W x H (in.): 29 1/2 x 19 x 14